Page 1
You can contact us through our website www.piranhafurniture.com where you will also find our full range of products. Retain all packaging as, if required, goods must be returned packed in the original cartons. MODEL PC2 TWO PEOPLE REQUIRED General Care: Keep furniture out of direct sunlight.
Page 2
PARTS LIST means this part is packed inside 2nd carton Right Left...
Page 4
SCREWS LIST PART QTY. ITEM PART QTY. ITEM 6X35 MM 6X12 MM 4X35 MM 4X4 MM Φ40 MM 3X15 MM 4X20 MM 6X25 MM 6X40 MM 3X12 MM 4X14 MM 4X16 MM 6X4 0MM 6X2 5MM BOL T INST AL LAT ION AS BEL OW : Bolt Connecting piece Rotate connecting piece if found...
Page 5
ASSEMBLY STEPS: SCREWS SCREWS 6X12 MM 3X12 MM 2PCS 4PCS SCREWS 4X35 MM 4PCS Right Left REPEAT FOR THE BOX DRAWER SCREWS SCREWS 3X15 MM 4X20 MM 4PCS 2PCS...
Page 6
SCREWS SCREWS 3X12 MM 6X12 MM 8PCS 4PCS SCREWS 4X35 MM Be careful not to overtighten the metal rod 4PCS SCREWS 4X20 MM 2PCS...
Page 7
move the lock lever on the inner rail as shown and separate the outer rail (36a) and inner rail (36b) from the 2 file drawer slides (36) SCREWS 3X12 MM 6PCS SCREWS 4X14 MM 16PCS...
Page 8
SCREWS 6X25 MM 4PCS SCREWS 6X40 MM 4PCS SCREWS 6X25 MM 6X40 MM 2PCS 4PCS...
Page 9
SCREWS 4X14 MM 16PCS Right Left SCREWS 3X15 MM 12PCS...
Page 10
P.10 SCREWS SCREWS 6X25 MM 3X15 MM 4PCS 2PCS SCREWS 6X40 MM 4PCS SCREWS 6X25 MM 6X40 MM 2PCS 4PCS...
Page 11
P.11 SCREWS 6X25 MM 4PCS SCREWS 4X14 MM 12PCS SCREWS 6X12 MM 4PCS...
Page 12
P.12 Left Right SCREWS 4X4 MM 4PCS SCREWS 6X35 MM 3PCS Φ40 MM 3PCS 6X25 MM 4PCS Right Left SCREWS 4X14 MM 4PCS...
Page 13
P.13 SCREWS SCREWS 4X20 MM 4X16 MM 2PCS 4PCS This direction for tighten, reverse for separating or adjust fitting's distance SCREWS 4X16 MM 4PCS...
Page 14
P.14 Inner silver ball bearing slide Keeping both runner slides fully Ensure the ball bearing glider extended, align the drawer is positioned at the front runners and then slide drawer all against the plastic end stop the way into the closed position applying a little force if required.
Need help?
Do you have a question about the PC2 and is the answer not in the manual?
Questions and answers