Piranha PC25 Assembly Instructions Manual

Store cabinet

Download this manual

You can contact us through our website

range of products.

Retain all packaging as, if required, goods must be returned packed in the original cartons.

TWO PEOPLE REQUIRED

General Care:

Keep furniture out of direct sunlight. Use mats and coasters to protect surfaces.

Do not place hot or wet items directly onto unprotected surfaces.

Cleaning:

Wipe surfaces with a clean damp (not wet) cloth then dry with a clean lint free cotton cloth.

Glass surfaces may be polished with window or other glass cleaning liquids.

A02 171010

STORE CABINET

sales@piranhafurniture.com

www.piranhafurniture.com

where you will also find our full

MODEL PC25

Table of Contents

Need help?

Do you have a question about the PC25 and is the answer not in the manual?

Page 1 Retain all packaging as, if required, goods must be returned packed in the original cartons. MODEL PC25 TWO PEOPLE REQUIRED General Care: Keep furniture out of direct sunlight. Use mats and coasters to protect surfaces.
Page 2: Parts List
PC25 PARTS LIST...
Page 3 PC25...
Page 4: Screws List
PC25 SCREWS LIST PART QTY. PART QTY. ITEM ITEM Φ15 MM 6X40 MM 5X40 MM 8X30 MM 4X14 MM 6X15 MM 3X15 MM 4X35 MM 6X40MM BOLT INSTALLATION AS BELOW: Bolt Connecting piece Rotate connecting piece if found Correct orientation to...
Page 5: Assembly Steps
PC25 ASSEMBLY STEPS: SCREWS 6X40 MM Φ15 MM SCREWS 5X40 MM SCREWS 6X40 MM Φ15 MM SCREWS 6X40 MM Φ15 MM...
Page 6 PC25 SCREWS 5X40 MM SCREWS 6X40 MM Φ15 MM move the lock lever on the inner rail as shown and separate the outer rail (4A) and inner rail (4B) from the 2 file drawer sliders (4)
Page 7 PC25 SCREWS 3X15 MM SCREWS 6X40 MM Φ15 MM SCREWS 6X40 MM Φ15 MM 8X30 MM 8X30 MM...
Page 8 PC25 SCREWS 4X14 MM SCREWS 6X40 MM Φ15 MM 8X30 MM...
Page 9 PC25 SCREWS 3X15 MM SCREWS 4X35 MM SCREWS 6X15 MM...
Page 10 PC25 P.10 SCREWS 3X15 MM Inner silver ball bearing slide Make sure inner silver ball bearing slide is at the front of the slide mount and in lock position(over the hump), as shown. HUMP Align both sides of slide runners to slide mounts’openings,then...