Table of Contents
Advertisement
Installing the monitor driver in Windows 10
To use the Plug and Play feature in Microsoft Windows 10, do the following:
1. Turn off the computer, all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the
Windows 10 operating system.
4. Find the driver of the corresponding monitor model from Lenovo's website:
http://support.lenovo.com/us/en/documents/T2054pC, and download it to the host connected
to this monitor for temporary storage (as shown in the figure on the desktop).
5. Right click on the Windows desktop, then select the Display settings in the pull-down
menu.
6. Click the Advanced display settings．
7. Click the Display adapter properties.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Click the Update driver button, click Browse the computer for driver software.
12. Click the Let me pick from the list of device drivers on my computer.
13. Click the "Install from the disk" button, click on the "Browse" button, and then
navigate to the following directory: X \ Monitor Drivers \ Windows 10
(Here, X stands for "the folder in which the downloaded driver locates" (such as desktop)
14. Select the " T2054pC.inf" file and click the Open button. Click the OK button.
15. Select "Lenovo T2054pC" and then click "Next".
16. After the installation is complete, delete the downloaded program files, and close all
the windows.
17. Restart the system. The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1440 x 900 at a refresh rate of 60 Hz, or 640 x 480
at a refresh rate of 60 Hz.
3-8
T2054pC Flat Panel Monitor User's Guide
Advertisement
Table of Contents
