Armitron M1034 Instruction Manual

FEATURES
• Time Telling Mode (Hours, Minutes, Seconds, and Date)
• (2) 24 Hour Alarms
• Hourly Chime: One 'Beep' sound every full Hour
• Chronograph: Hours, Minutes, Seconds, and 1/100 of a Second with
Lap Operation
• Countdown Timer
• World Time
• Daylight Savings Time
• 12/24 Hour (Military Time)
• Water Resistant as indicated on the watch
• INSTALITE- Electro Luminescent Display
EL LIGHT FEATURE
1. Press 'D' in any mode to illuminate the watch face. The backlight will
remain lit for 3 seconds.
NOTE: Excessive use of the light will shorten battery life.
SELECTING FEATURES
1. Time Telling Mode displays Hours, Minutes, Seconds, Month, Date, and
Day of the Week.
2. From Time Telling Mode, press 'B' once. Chronograph Mode appears.
Press 'B' five times to return to Time Telling Mode.
3. From Time Telling Mode, press 'B' twice. Timer Mode appears. Press 'B'
four times to return to Time Telling Mode.
4. From Time Telling Mode, press 'B' three times. Alarm Mode appears.
Press 'B' three times to return to Time Telling Mode.
5. From Time Telling Mode, press 'B' four times. Second Time Mode ap-
pears. Press 'B' twice to return to Time Telling Mode.
6. From Time Telling Mode, press 'B' five times. Hourly Chime Mode ap-
pears. Press 'B' once to return to Time Telling Mode.
SETTING THE TIME AND CALENDAR
1. From Time Telling Mode, press and hold 'A' until the Seconds flash.
Press 'C' to zero out the Seconds.
NOTE: Zeroing out 30 or more seconds automatically adds one minute to
time.
2. Press 'B'. Minutes flash. Press 'C' to advance the Minutes.
NOTE: Pressing and holding 'C' will advance digits rapidly.
3. Press 'B'. Hours flash. Press 'C' to advance the Hours.
NOTE: When 12 Hour Format is selected, 'PM' indicates 'p.m: times; there
is no indicator for 'a.m: times.
4. Press 'B'. The Year flashes. Press 'C' to advance the Year.
5. Press 'B'. Months flash. Press 'C' to advance the Month.
6. Press 'B'. The Date flashes. Press 'C' to advance the Date.
7. Press 'B'. 12/24 Hour Time Format flashes. Press 'C' to select either 12
Hour or 24 Hour (Military) Time.
NOTE: '12' indicates 12 Hour Format; '24' indicates 24 Hour (Military
Time).
8. Press 'B'. The 'Beep' sound flashes. Press 'C' to activate ("ON") or
deactivate ("OFF") the 'Beep' sound.
9. Press 'A' to end sequence and return to Time Telling Mode.
SETTING THE 24 HOUR ALARMS
1. From Time Telling Mode, press 'B' three times to enter the Alarm Mode.
2. Press 'C' to select the Alarm Number: (1-4) 24 Hour Daily Alarms and
(5-8) Date Alarms.
3. Press and hold 'A'. The selected Alarm's Hours flash. Press 'C' to ad-
vance the Alarm Hours.
4. Press 'B'. The selected Alarm's Minutes flash. Press 'C' to advance the
Alarm Minutes.
5. Press 'B'. The selected Alarm's Time Zone flashes (T1 or T2). Press 'C'
to select the Time Zone.
6. Press 'A' to end sequence.
7. Press 'B' to return to Time Telling Mode.
LIMITED LIFETIME WARRANTY & INSTRUCTIONS MANUAL
STOPWATCH
1. From Time Telling Mode, press 'B' once to enter the Stopwatch Mode.
2. Press 'C' to start timing.
3. Press 'D' to stop timing.
4. If desired, press 'C' to resume timing. Press 'D' to stop timing.
5. Press 'A' to reset to zero.
6. Press 'B' to return to Time Telling Mode.
SPLIT TIME
1. While in the Stopwatch Mode, press and hold 'A'. SPLIT/LAP Time flash-
es. Press 'C' to select SPLIT Time (SPL).
2. Press 'A' to return to the Stopwatch Mode.
3. Press 'C' to start timing.
4. Press 'C' again to measure Split Times.
5. Press 'D' to stop timing at the end of the event.
6. Press 'A' to enter RECALL Mode.
7. Press 'C' to display Split Times.
8. Press and hold 'A' to reset the Split Times to zero.
9. Press 'B' to return to Time Telling Mode.
DUAL TIME ZONE
1. From Time Telling Mode, press 'B' four times to enter the Second Time
Zone Mode.
2. Press and hold 'A'. Second Time Zone Minutes flash. Press 'C' to ad-
vance the Minutes.
3. Press 'B'. Second Time Zone Hours flash. Press 'C'
to advance the Hours.
4. Press 'A' to end sequence.
5. Press 'B' to return to Time Telling Mode.
NOTE: The Second Time Zone (Dual Time) Clock may be used to keep
track of a foreign time.
COUNTDOWN TIMER
1. From Time Telling Mode, press 'B' twice to enter the Timer Mode.
2. Press and hold 'A'. Hours flash. Press 'C' to adjust the Hour.
3. Press 'B'. Minutes flash. Press 'C' to adjust the Minutes.
4. Press 'B'. Seconds flash. Press 'C' to adjust the Seconds.
5. When the Countdown Timer is set, press 'A' to end set sequence and
return to Timer Mode.
6. Press 'C' to start the Countdown Timer.
7. If desired, press 'D' to stop the Countdown Timer. Press 'C' again to
resume the Countdown Timer.
NOTE: The Countdown timing will continue in any mode until '0' is
pressed. During the last 10 seconds of the countdown, the alarm will beep
once per second. When the Timer has expired, the alarm will sound for
about 10 seconds or until any button is pressed.
8. Press 'D' to stop the Timer.
9. Press 'B' to return to Time Telling Mode.
M1034