Table of Contents
Advertisement
& Memory Boot Mode
(Note)
Provides memory detection and training methods.
Auto
Lets the BIOS automatically configure this setting. (Default)
S kip memory detection and training in some specific criteria for faster memory boot.
Enable Fast Boot
Disable Fast Boot
Detect and train memory at every single boot.
& Memory Enhancement Settings
Provides several memory performance enhancement settings: Normal (basic performance), Relax OC,
Enhanced Stability, and Enhanced Performance. (Default: Normal)
& Memory Timing Mode
Manual and Advanced Manual allows the Memory Multiplier Tweaker, Channel Interleaving, Rank
Interleaving, and memory timing settings below to be configurable. Options are: Auto (default), Manual,
Advanced Manual.
& Profile DDR Voltage
When using a non-XMP memory module or Extreme Memory Profile (X.M.P.) is set to Disabled, the value
is displayed according to your memory specification. When Extreme Memory Profile (X.M.P.) is set to
Profile1 or Profile2, the value is displayed according to the SPD data on the XMP memory.
& Memory Multiplier Tweaker
Provides different levels of memory auto-tuning. (Default: Auto)
& Channel Interleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. Auto lets the BIOS
automatically configure this setting. (Default: Auto)
& Rank Interleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically
configure this setting. (Default: Auto)
` IMC Timing Settings
This sub-menu provides options for tuning memory compatibility and stability.
` Channel A/B Memory Sub Timings
This sub-menu provides memory timing settings for each channel of memory. The respective timing setting
screens are configurable only when Memory Timing Mode is set to Manual or Advanced Manual. Note: Your
system may become unstable or fail to boot after you make changes on the memory timings. If this occurs, please
reset the board to default values by loading optimized defaults or clearing the CMOS values.
` Advanced Voltage Settings
` Advanced Power Settings
& CPU Vcore Loadline Calibration
Allows you to configure Load-Line Calibration for the CPU Vcore voltage. Selecting a higher level keeps
the CPU Vcore voltage more consistent with what is set in BIOS under heavy load. Auto lets the BIOS
automatically configure this setting and sets the voltage following Intel's specifications. (Default: Auto)
& VAXG Loadline Calibration
Allows you to configure Load-Line Calibration for the CPU VAXG voltage. Selecting a higher level keeps
the CPU VAXG voltage more consistent with what is set in BIOS under heavy load. Auto lets the BIOS
automatically configure this setting and sets the voltage following Intel's specifications. (Default: Auto)
(Note)
This item is present only when you install a CPU and a memory module that support this feature.
- 24 -
Advertisement
Table of Contents
