Download Print this page

Table Of Contents - Lalizas INFLATABLE LIFERAFT Operation Manual

Advertisement

1.
Structure Introduction
2.
3.
4.
5.
6.
7.
8.
OCEANO OR - Open Reversible inflatable liferafts are special liferafts designed and
manufactured by LALIZAS. These liferafts are applicable for high-speed crafts engaged in
warm sea area in China and in the international voyages only.
The floor of the liferaft is between the buoyancy tubes. After the inflation, the occu-
pants can board immediately, whichever side of the liferaft is above the sea level.
1. Structure Introduction
1.1 This inflatable liferaft is composed of upper and lower buoyancy tubes, floor and so on
(Picture 1).
1.2 The section of the upper and lower buoyancy tubes is round-shaped; the appearance
of the body is round or polygon when it is looked from above.
1.3 The upper and lower buoyancy tubes and its connected inflation tubes are two separate
gas chambers. These chambers have their own inflation system and can be inflated auto-
matically by steel cylinders with mixed gas of CO2 & N2 at the same time.
1.4 The floor is made of single-layer antiskid fabric, which is between the two buoyancy
tubes. Both the upper and lower sides have one or two discharge systems.
1.5 The buoyancy tubes are equipped with lighting or indication lights and reflective materi-
als.
Contents
1

Advertisement

loading