Important Safeguards - Hamilton Beach Go Sport Manual

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to
persons, including the following:
1. Read all instructions.
2. This appliance is not intended for use by persons (including
children) with reduced physical, sensory, or mental capabilities,
or lack of experience and knowledge, unless they are closely
supervised and instructed concerning use of the appliance by a
person responsible for their safety.
3. Close supervision is necessary when any appliance is used by or
near children. Children should be supervised to ensure that they
do not play with the appliance.
4. To protect against risk of electrical shock, do not put cord, plug,
base, or motor in water or other liquid.
5. Unplug cord from outlet when not in use, before putting on or
taking off parts, and before cleaning.
6. Avoid contact with moving parts.
7. Do not operate any appliance with a damaged supply cord or
plug, or after the appliance malfunctions or has been dropped
or damaged in any manner. Supply cord replacement and
repairs must be conducted by the manufacturer, its service
agent, or similarly qualified persons in order to avoid a hazard.
Call the provided customer service number for information on
examination, repair, or adjustment.
8. The use of attachments, including canning jars, not recommended
or sold by the appliance manufacturer may cause a risk of injury
to persons.
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter or touch hot
surfaces, including stove.
11. Do not place on or near a hot gas or electric burner, or in a heated
2

IMPORTANT SAFEGUARDS

SAVE THESE INSTRUCTIONS!
oven.
12. Keep hands and utensils out of the jar and away from the cutting
blade, while blending or chopping food, to reduce the risk of
severe personal injury and/or damage to the blender (attachments
may not be provided with blender). A rubber spatula may be used
but only when blender is not running.
13. Blades are sharp; handle carefully—especially when assembling,
disassembling, or cleaning inside blender jar.
14. Do not use a broken, chipped, or cracked blender jar.
15. Do not use broken, cracked, or loose cutting blade assembly.
16. To reduce the risk of injury, never place cutting blade assembly on
base without jar properly attached.
17. Do not blend hot liquids.
18. Ensure cutting blade assembly is tight and secure to jar. Injury can
result if moving blades accidentally become exposed.
19. If the jar should twist or rotate when the motor is switched ON,
switch OFF ( ) immediately and tighten jar in collar or on
blender base.
20. Do not leave blender unattended while it is operating.
21. To disconnect cord, turn the control to OFF (
plug from wall outlet.
22. Do not use appliance for other than intended purpose.
23. CAUTION: In order to avoid a hazard due to inadvertent resetting
of the thermal cut-out this appliance must not be supplied through
an external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by the utility.
24. Do not operate more than 2 minutes ON at a time. Please refer to
the revelant instructions for the special recipes.
). Then remove