Returning The Seat(S) To An Upright Position; Removing The 50/50 Split Bench Seats - Cadillac Escalade 2004 Escalade ESV Owner's Manual

Returning the Seat(s) to an Upright
Position
CAUTION:
{
If the seatback isn't locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure it is
locked.
To return the seatback to an upright position, do the
following:
1. Pull the lever labeled 3 toward you.
2. While still holding the lever 3 toward you, grasp the
top of the seat and pull it toward you slightly.
3. Let go of lever 3 and pull the seat completely down.
4. Push down on the seat firmly. Try pulling it up to
be sure it is locked into place.

Removing the 50/50 Split Bench Seats

To remove the 50/50 split bench seat, do the following:
1. Open the liftgate.
5. Pull up on the release
lever labeled 1 and
then pull up on
the seatback or the
assist strap located on
the outboard side of
the seat until the
seatback locks into the
upright position.
1-15