Cadillac 2011 SRX Owner's Manual page 267

To Transfer Audio From the
Bluetooth System to a Cell Phone
During a call with the audio in the
vehicle:
1. Press .
2. Say Transfer Call.
To Transfer Audio to the Bluetooth
System From a Cell Phone
During a call with the audio on the
cell phone, press . The audio
transfers to the vehicle. If the audio
does not transfer to the vehicle,
use the audio transfer feature on
the cell phone. See your cell phone
manufacturers user guide for more
information.
Voice Pass-Thru
Voice pass thru allows access to
the voice recognition commands on
the cell phone. See your cell phone
manufacturer's user guide to see if
the cell phone supports this feature.
To access contacts stored in the cell
phone:
1. Press . For vehicles with a
navigation system, say Hands
Free, after the tone.
2. Say Bluetooth. The system
responds Bluetooth ready ,
followed by a tone.
3. Say Voice. The system
responds OK, accessing
<phone name>.
The cell phone's normal
prompt messages will
go through their cycle
according to the phone's
operating instructions.
Dual Tone Multi-Frequency
(DTMF) Tones
The Bluetooth system can send
numbers and the numbers stored
as name tags during a call. You can
use this feature when calling a
menu driven phone system.
Account numbers can also be
stored for use.
Infotainment System
Sending a Number or Name Tag
During a Call
1. Press . The system
responds Ready , followed by
a tone.
2. Say Dial.
3. Say the number or name tag
to send.
Clearing the System
Unless information is deleted out
of the in vehicle Bluetooth system,
it will be retained indefinitely.
This includes all saved name tags in
the phone book and phone pairing
information. For information on how
to delete this information, see the
previous sections on Deleting a
Paired Phone and Deleting
Name Tags.
7-63