Table of Contents
Advertisement
Voice pass thru allows access to the
voice recognition commands on the
cell phone. See your cell phone
manufacturer's user guide to see if
the cell phone supports this feature.
To access contacts stored in the cell
phone:
1. Press and hold
two seconds.
2. Say Bluetooth. The system
responds Bluetooth ready,
followed by a tone.
3. Say Voice. The system
responds OK, accessing
<phone name>.
The cell phone's normal prompt
messages will go through their cycle
according to the phone's operating
instructions.
The Bluetooth system can send
numbers and the numbers stored as
name tags during a call. You can
use this feature when calling a
menu driven phone system.
Account numbers can also be
stored for use.
for
1. Press
responds Ready, followed by
a tone.
2. Say Dial.
3. Say the number or name tag
to send.
. The system
Unless information is deleted out of
the in vehicle Bluetooth system, it
will be retained indefinitely. This
includes all saved name tags in
the phone book and phone pairing
information. For information on how
to delete this information, see the
previous section Deleting a Paired
Phone and the previous sections
on deleting name tags.
®
The Bluetooth
word mark and
logos are owned by the Bluetooth
SIG, Inc. and any use of such marks
by General Motors is under license.
Other trademarks and trade names
are those of their respective owners.
®
Advertisement
Table of Contents
