Download Print this page
KidKraft BROOKRIDGE CLIMBING FRAME Installation And Operating Instructions Manual

KidKraft BROOKRIDGE CLIMBING FRAME Installation And Operating Instructions Manual

Advertisement

Quick Links

BROOKRIDGE CLIMBING FRAME – F26410E
INSTALLATION AND OPERATING INSTRUCTIONS
Brookridge
Height: 9 feet
Length: 12 feet 11"
Width: 12 feet 9"
4.22m
8.22m
8-10 Hrs
Two person
assembly
KidKraft, Inc.
4630 Olin Road
Dallas, Texas 75244 USA
customerservice@kidkraft.com
canadacustomerservice@kidkraft.com
1.800.933.0771
972.385.0100
For online parts replacement visit
https://parts.kidkraft.com/
WARNING
and give them to any future owner of this play system. Manufacturer contact information provided below.
OBSTACLE FREE SAFETY ZONE - 7.92m x 8.22m area requires Protective Surfacing. See page 3.
MAXIMUM VERTICAL FALL HEIGHT - 6'5"
7.92m
3.86m
CAPACITY - 9 Users Maximum, Ages 3 to 10; Weight Limit 110 lbs. (49.9 kg) per child.
RESIDENTIAL HOME USE ONLY. Not intended for public areas such as schools, churches, nurseries, day cares or parks.
WARNING! Only for domestic use.
FOR OUTDOOR DOMESTIC USE ONLY
KidKraft Netherlands BV
Olympisch Stadion 8
1076 DE Amsterdam
The Netherlands
europecustomerservice@kidkraft.com
+31 20 305 8620 M-F from 09:00 to 17:30
(GMT+1)
For online parts replacement visit
https://parts.kidkraft.eu/
To reduce the risk of serious injury or death, you must read and
follow these instructions. Keep and refer to these instructions often
Table of Contents
Warnings and Safe Play Instructions. . . . . . . . . . . . . . . pg. 2
Protective Surfacing Guidelines. . . . . . . . . . . . . . . . . . . pg. 3
Instructions for Proper Maintenance . . . . . . . . . . . . . . . pg. 4
About Our Wood – Limited Warranty . . . . . . . . . . . . . . pg. 5
Keys to Assembly Success . . . . . . . . . . . . . . . . . . . . . . pg. 6
Metric Conversion Sheets . . . . . . . . . . . . . . . . . . . . . pg. 7,8
Part ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 9
Installation of I.D./Warning Plaque . . . . . . . . . . . .Final Step
9402645
Rev 06/23/2020

Advertisement

loading
Need help?

Need help?

Do you have a question about the BROOKRIDGE CLIMBING FRAME and is the answer not in the manual?

Questions and answers

Summary of Contents for KidKraft BROOKRIDGE CLIMBING FRAME

  • Page 1 BROOKRIDGE CLIMBING FRAME – F26410E INSTALLATION AND OPERATING INSTRUCTIONS Brookridge Height: 9 feet Length: 12 feet 11" Width: 12 feet 9" WARNING To reduce the risk of serious injury or death, you must read and follow these instructions. Keep and refer to these instructions often and give them to any future owner of this play system.
  • Page 2 Cool hot slide and rides with water and wipe o l l l i h i l s r fi dry prior to using. run up slide. Orientate slide such that it gets the least amount of exposure to the sun. europecustomerservice@kidkraft.com...
  • Page 3 Denotes Use Zone with Protective Surfacing 6 ft. 6 ft. Denotes Use Zone with Protective Surfacing 6 ft. 6 ft. 6 ft. Use Zone for Single-Axis Swings Use Zone for Multi-Axis Swings From the CPSC Outdoor Home Playground Safety Handbook. At http://www.playgroundregs.com/resources/CPSC%20324.pdf europecustomerservice@kidkraft.com...
  • Page 4 Instructions for Proper Maintenance Your KidKraft Play System is designed and constructed of quality materials with your child’s safety in mind. As with all outdoor products used by children, it will weather and wear. To maximize the enjoyment, safety and life of your Play Set, it is important that you, the owner, properly maintain it.
  • Page 5 About Our Wood KidKraft Premium Play Systems uses 100% FSC wood. Although we take great care in selecting the best quality lumber available, wood is still a product of nature and susceptible to weathering which can change the appearance of your set.
  • Page 6 5/16” is slightly larger than 1/4”. Note: Wafer head bolts with blue lock Flat T-Nut tight or a bolt with a Ny-Lok nut do Washer (Hammer into place) NOT require a lock washer. Do not crush wood! europecustomerservice@kidkraft.com...
  • Page 7 europecustomerservice@kidkraft.com...
  • Page 8 2pc. - 1768 - Lower Back FSC 1 x 5 x 38 1/2" - 4641768 - Box 2 1pc. - 2037 - Front Top FSC 1 x 5 x 38 1/2" - 4642037 - Box 2 1pc. - 2029 - Ground SW FSC 1 x 5 x 72" - 4642029 - Box 2 europecustomerservice@kidkraft.com...
  • Page 9 1pc. - 1937 - Centre Divider FSC 2 x 2 x 31 3/4" - 4641937 - Box 2 1pc. - 1761 - Side Joist FSC 2 x 2 x 34 3/4" - 4641761 - Box 2 1pc. - 1941 - Water Sand Support FSC 2 x 2 x 35 7/8" - 4641941 - Box 2 europecustomerservice@kidkraft.com...
  • Page 10 1pc. - 1943 - MK Rail Long FSC 2 x 4 x 54" - 4641943 - Box 2 1pc. - 2035 - SW Mount FSC 2 x 4 x 59 1/2" - 4642035 - Box 2 4pc. - 1931 - Post FSC 2 x 4 x 81" - 4641931 - Box 2 europecustomerservice@kidkraft.com...
  • Page 11 Canopy Gr./Yel. Green Covers (8pk) 1X 9750237 Cafe Canopy Green/Yellow 1X 9200840 1 x 9750236 1X 3750235 1X 3320161 Greenbrook Cafe Brookridge Tarp 1X 7310149 Telescope Brookridge Canoy Set Frame - Green Green/Yellow Green/Yellow Slide 48" High Rail -Green europecustomerservice@kidkraft.com...
  • Page 12 Hex Bolt 5/16 x 1 1/2" Hex Bolt 5/16 x 2" 4pc. - G1 - - (9277312) 2pc. - G8 - - (9277320) Hex Bolt 5/16 x 3" 3pc. - - (9277330) Hex Bolt 5/16 x 4" 5pc. - G4 - - (9277340) europecustomerservice@kidkraft.com...
  • Page 13 16pc. - S6 -Pan Screw - (9264610) #8 x 2 1/2" 23pc. - S3 -Flat Head Screw - (9290522) #12 x 2" 20pc. - S7 -Pan Screw - (9264620) #8 x 3" 10pc. - S4 -Flat Head Screw - (9290530) europecustomerservice@kidkraft.com...
  • Page 14 • Each step indicates which bolts and/or screws you will need for assembly, as well as any flat washers, lock washers, t-nuts or lock nuts. For Parts Replacement: • Use our Online form https://parts.kidkraft.eu • Email us at europecustomerservice@kidkraft.com • Call us at +31 20 305 8620 Read the assembly manual completely, paying special attention to EN71 and ASTM warnings;...
  • Page 15 CE Rock Board B 1 x 6 x 17” 1777 1/4 x 1-1/4 Pan Bolt CE Rock Board A 1 x 6 x 17” 1778 (1/4” lock washer, 3/16” flat washer & 1/4” barrel nut) Rock Rail 2 x 3 x 51” 0349 europecustomerservice@kidkraft.com...
  • Page 16 1 x Bolt-Thru Swing Hangers (pkg of 4) 1248 (1/4” lock washer, 1/4” flat washer, 1/4” t-nut) Back Beam 2 x 6 x 94” 1249 1 x Triangle Plate (pkg of 4) 5/16 x 1-1/2” Hex Bolt (5/16” lock washer, 5/16” flat washer, 5/16” t-nut) europecustomerservice@kidkraft.com...
  • Page 17 SW Post 2 x 4 x 86-11/16” 1863 (5/16” lock washer, 5/16” flat washer, 5/16” t-nut) SW Support 5/4 x 4 x 46-1/2” 1862 SW Upright 2 x 4 x 48-5/16” 5/16 x 4-1/2” Hex Bolt 1856 (5/16” lock washer, 5/16” flat washer, 5/16” t-nut) europecustomerservice@kidkraft.com...
  • Page 18 SW Rail Block 2 x 4 x 5-3/8” 4919 5/16 x 4-1/2” Hex Bolt (5/16” lock washer, 5/16” flat washer, 5/16” t-nut) 5/16 x 5-1/2” Hex Bolt (5/16” flat washer x2, 5/16” lock nut) 5/16 x 2” Hex Bolt (5/16” flat washer x2, 5/16” lock nut) europecustomerservice@kidkraft.com...
  • Page 19 (1943) MK Rail Long (fig. 6.3) Wood Parts Hardware Tennon Dowel 1-1/8 x 15-7/8” #8 x 2-1/2” Wood Screw 1578 MK Rail Long 2 x 4 x 54” 1943 MK Rail Short 2 x 4 x 50” 1565 europecustomerservice@kidkraft.com...
  • Page 20 1/4 x 2” Hex Bolt (1/4” lock washer, 1/4” flat washer, 1/4” t-nut) MK Ground 1 x 4 x 55-1/4” 0353 1/4 x 2-1/2” Lag Screw (1/4” flat washer) Post MK 2 x 3 x 70” 1367 #8 x 1-1/2” Wood Screw Tennon Dowel 1-1/8 x 18-5/8” 1858 europecustomerservice@kidkraft.com...
  • Page 21 Fig. 8.1 5/16” Flat 1367 Washer DO NOT USE THESE IMAGES 5/16” Lock Washer 1367 Other Parts Hardware 2 x MK Bracket 5/16 x 3” Hex Bolt (5/16” lock washer, 5/16” flat washer, 5/16” t-nut) #12 x 1” Pan Screws europecustomerservice@kidkraft.com...
  • Page 22 1/4 x 2” Hex Bolt (1/4” lock washer, 1/4” flat washer, 1/4” t-nut) Post 2 x 4 x 81” 1931 Side Roof 1 x 4 x 58-1/2” 2030 End Floor 1 x 5 x 35-1/4” 2032 Cafe Ground 1 x 5 x 35-7/8” 2036 europecustomerservice@kidkraft.com...
  • Page 23 1/4 x 2” Hex Bolt (1/4” lock washer, 1/4” flat washer, 1/4” t-nut) Wall Support 1 x 4 x 35-7/8” 2034 1/4 x 1-1/2” Lag Screw (1/4” flat washer) Roof Support 2 x 2 x 57-1/8” 2031 #8 x 1-1/2” Wood Screw europecustomerservice@kidkraft.com...
  • Page 24 1/4 x 2” Hex Bolt (1/4” lock washer, 1/4” flat washer, 1/4” t-nut) 1931 Lower Diagonal 2 x 3 x 37” 0369 Side Roof 1 x 4 x 58-1/2” 2030 Ground SW 1 x 5 x 72” 2029 Floor End 1 x 5 x 35-1/4” 1895 europecustomerservice@kidkraft.com...
  • Page 25 5/16 x 4” Hex Bolt (5/16” lock washer, 5/16” flat washer, 5/16” t-nut) Wall Support 1 x 4 x 35-7/8” 2034 1/4 x 1-1/2” Lag Screw (1/4” flat washer) SW Mount 2 x 4 x 59-1/2” 2035 1/4 x 3” Lag Screw (1/4” flat washer) #8 x 1-1/2” Wood Screw europecustomerservice@kidkraft.com...
  • Page 26 Centre Divider 2 x 2 x 31-3/4” 1937 Front Floor 2 x 3 x 38-1/2” 1/4 x 3” Hex Bolt (1/4” lock washer, 1/4” flat washer, 1/4” t-nut) 1908 Lower Back 1 x 5 x 38-1/2” 1768 #12 x 2” Pan Screw (3/16” flat washer) europecustomerservice@kidkraft.com...
  • Page 27 #8 x 3” Wood Screw as shown in fig. 12.2. Fig. 12.1 Fig. 12.2 1931 1908 0312 0312 Flush to edge Wood Parts Hardware Gusset 2 x 3 x 16” #8 x 2-1/2” Wood Screw 0312 #8 x 3” Wood Screw europecustomerservice@kidkraft.com...
  • Page 28 1/4 x 4-1/2” Hex Bolt (1/4” lock washer, 1/4” flat washer, 1/4” t-nut) 1894 MK Mount 2 x 3 x 35” 2033 1/4 x 3-1/2” Hex Bolt (1/4” lock washer, 1/4” flat washer, 1/4” t-nut) #12 x 2” Pan Screw europecustomerservice@kidkraft.com...
  • Page 29 1/4 x 3” Hex Bolt (1/4” lock washer, 1/4” flat washer, 1/4” t-nut) Top Front Back 1 x 4 x 38-1/2” 1906 1/4 x 3” Lag Screw (1/4” flat washer) Lower Back 1 x 5 x 38-1/2” 1768 #12 x 2” Pan Screw (with 3/16” flat washer) europecustomerservice@kidkraft.com...
  • Page 30 14.1. Attach using 2 (S3) #8 x 2-1/2” Wood Screws per ground stake. (fig. 14.2) Fig. 14.1 Fig. 14.2 0369 1931 0369 10-1/2” In 0318 Ground Hardware Wood Parts #8 x 2-1/2” Wood Screw Ground Stakes 1-1/4 x 1-1/2 x 14” 0318 europecustomerservice@kidkraft.com...
  • Page 31 Fig. 15.1 Fig. 15.2 1937 1908 0349 Flush Front 1908 Fig. 15.3 0349 1779 0349 Fig. 15.4 Wood Parts Hardware CE Access Board 1 x 6 x 17” #8 x 1-3/4” Wood Screw 1779 #8 x 1-1/2” Wood Screw europecustomerservice@kidkraft.com...
  • Page 32 Swing Wall Side Fig. 16.2 2035 Fig. 16.3 1895 2034 1895 2-3/4” 1903 Remove these bolts, then re-attach after 1903 joist is installed. Wood Parts Hardware Floor Joist 5/4 x 3 x 38-1/2” #8 x 3” Wood Screw 1903 europecustomerservice@kidkraft.com...
  • Page 33 Joist and (1908) Front Floor using 5 (S2) #8 x 1-1/2” Wood Screws per board. (fig. 16.5) Fig. 16.5 Swing Wall Side 1761 1903 1890 1890 1908 Wood Parts Hardware CE Gap Board 1 x 6 x 32-1/2” 10 x #8 x 1-1/2” Wood Screw 1890 europecustomerservice@kidkraft.com...
  • Page 34 Screws per board. (fig. 17.1) Fig. 17.1 (hidden under floor boards) 1761 S2 x 5 per board (hidden behind boards) 1903 1890 1890 1889 1908 Wood Parts Hardware Floor Board 1 x 6 x 32-1/2” 25 x #8 x 1-1/2” Wood Screw 1889 europecustomerservice@kidkraft.com...
  • Page 35 Fig. 18.1 1906 Front 2033 Back 1944 1894 1227 Note beveled edge faces inside Wood Parts Hardware Panel Frame 1 x 2 x 24-3/8” #8 x 1-1/2” Wood Screw 1944 CE Wall Board 1 x 4 x 20” 1227 europecustomerservice@kidkraft.com...
  • Page 36 1227 2033 with #8 flat washers Note: Leave these holes vacant until later step. with #8 flat washers Other Parts Hardware 12 x #8 x 1/2” Pan Screw (#8 flat washer) 1 x Chalk Wall Tarp europecustomerservice@kidkraft.com...
  • Page 37 1931 S0 x 24 1931 1503 2034 1503 Note: Some boards were removed for clarity 2032 Wood Parts Hardware Wall Board 1/2 x 4 x 20” 24 x #8 x 7/8” Truss Screw 1503 europecustomerservice@kidkraft.com...
  • Page 38 1931 2034 x 4 per board 1503 1931 Note: Some boards were Swing Wall Side 1895 removed for clarity Fig. 21.1 Wood Parts Hardware Wall Board 1/2 x 4 x 20” 24 x #8 x 7/8” Truss Screw 1503 europecustomerservice@kidkraft.com...
  • Page 39 Other Parts 4 x Corner Brace Ridge 2 x 2 x 46-3/4” 12 x #8 x 1/2” Pan Screw 1900 Tarp Front Back 1 x 4 x 46-3/4” 1909 #8 x 1-1/2” Wood Screw #8 x 3” Wood Screw europecustomerservice@kidkraft.com...
  • Page 40 D: Attach Canopy to each end of (1900) Ridge with 2 (S5) #8 x 1/2” Pan Screws (with #8 flat washer). (fig. 23.2) Fig. 23.2 Canopy 1900 Graphic Not Shown Fig. 23.1 x 5 per side with #8 flat washer 1909 Other Parts Hardware 1 x Canopy 12 x #8 x 1/2” Pan Screw (with #8 flat washer) europecustomerservice@kidkraft.com...
  • Page 41 #8 x 1-1/2” Wood Screw 1 x MB Mount Strap #12 x 1” Pan Screw 1 x MK Bracket 5/16 x 3” Hex Bolt (5/16” lock washer, 5/16” flat washer, 5/16” t-nut) 1/4 x 2-1/2” Lag Screw (1/4” flat washer) europecustomerservice@kidkraft.com...
  • Page 42 Fig. 25.2 Fig. 25.1 1367 1367 10-1/2” In Ground 0318 Wood Parts Hardware Ground Stake 1-1/4 x 1-1/2 x 14” #8 x 2-1/2” Wood Screw 0318 europecustomerservice@kidkraft.com...
  • Page 43 B: Attach Slide to fort through the floor boards and into (1908) Front Floor using 3 (S7) #12 x 2” Pan Screws. (fig. 26.2 & 26.3) Fig. 26.3 Fig. 26.1 Slide Floor Boards Side View 1908 Fig. 26.2 1931 Tight 1908 Slide tight to (1931) Post Slide Other Parts Hardware 1 x Slide #12 x 2” Pan Screw europecustomerservice@kidkraft.com...
  • Page 44 2032 3-1/4” 1931 1931 Cafe Wall Side SIZE DWG. NO. Brookridge Cafe SCALE:1:12 WEIGHT: Hardware Other Parts #8 x 1/2” Pan Screw (#8 flat washer) 1 x Cafe Canopy Frame #12 x 1” Pan Screw 1 x Cafe Canopy europecustomerservice@kidkraft.com...
  • Page 45 Fig. 28.2 1931 Outside Fort View Fig. 28.1 Brookridge Tarp 1-1/2” 1931 6-5/8” 6-5/8” 1-1/2” with #8 flat washer 3/4” 2036 Loosen these bolts Hardware Other Parts #8 x 1/2” Pan Screw (#8 flat washer) 1 x Brookridge Tarp europecustomerservice@kidkraft.com...
  • Page 46 2036 Wood Parts Hardware #8 x 2-1/2” Wood Screw Cafe Top 5/4 x 4 x 35-7/8” 2028 Water Sand Support 2 x 2 x 35-7/8” #8 x 1/2” Pan Screw (#8 flat washer) 1941 #12 x 2” Pan Screw europecustomerservice@kidkraft.com...
  • Page 47 Machine Screw Fig. 29.1 1/4” Lock washer 1/4” Flat washer Seat Spacer Seat Support 1/4-20 Lock Nut Cross Brace Fig. 29.2 1/4-20 x 1-1/4” Machine Screw Hardware Other Parts 2 x 1/4” Lock Washer 1 x Stool Set (with hardware) europecustomerservice@kidkraft.com...
  • Page 48 Seat Assembly. (fig. 30.1 and 30.2) Fig. 30.1 2036 Parts Removed for Clarity 5/16” Flat Washer 5/16” Lock 5/16” Washer T-Nut 2036 Fig. 30.2 Hardware 5/16 x 1” Hex Bolt (5/16” lock washer, 5/16” flat washer, 5/16” t-nut) europecustomerservice@kidkraft.com...
  • Page 49 5/16” Flat Washer 5/16” Lock Nut 5/16” Flat Washer 5/16” Flat Washer Hardware 5/16 x 2” Hex Bolt (5/16” flat washer x 2, 5/16” lock nut) 5/16 x 4-1/2” Hex Bolt (5/16” flat washer, 5/16” lock washer, 5/16” t-nut) europecustomerservice@kidkraft.com...
  • Page 50 10-1/2” into ground. Digging or driving stakes can be dangerous if you do not check first for underground wiring, cables or gas lines. Fig. 32.1 1863 1863 10-1/2” In Ground 0318 Fig. 32.2 Wood Parts Hardware Ground Stake 1-1/4 x 1-1/2 x 14” #8 x 2-1/2” Wood Screw 0318 europecustomerservice@kidkraft.com...
  • Page 51 Other Parts 2 x Glider End 5/16” Glider Long Hex Bolt (5/16” flat washer x 2, 5/16” lock nut) 1 x Glider Seat 1 x Glider Rope (pkg of 4) 8 x 5/16” Flat Washer 4 x 5/16” Lock Nut europecustomerservice@kidkraft.com...
  • Page 52 Fig. 23.3 Fig. 23.4 Telescope Fig. 34.3 Mount Fig. 34.2 1931 x 2 Belt swings Telescope Hardware Other Parts 2 x Belt Swings #8 x 1-1/2” Wood Screw 1 x Telescope 8 x Swing Hanger Cover x 2 Belt swings europecustomerservice@kidkraft.com...
  • Page 53 Hardware Other Parts #8 x 1/2” Pan Screw 1 x I.D. Plaque europecustomerservice@kidkraft.com...
  • Page 54 NOTES NOTES europecustomerservice@kidkraft.com...
  • Page 55 NOTES NOTES europecustomerservice@kidkraft.com...
  • Page 56 Would you recommend the purchase of our products to friends and family? Comments: MAIL TO: Fill out your registration card online at KidKraft Netherlands BV https://prdregistration.kidkraft.com/ Olympisch Stadion 8 1076 DE Amsterdam The Netherlands KidKraft would like to say Thank You for Attention: Customer Service your time and feedback.

This manual is also suitable for:

F26410e