To Change Temperature Setting - Cool-Living CL-TTW-10 Operating Instructions Manual

Air Conditioner Features(continued)
TO TURN UNIT ON:
TO CHANGE
TEMPERATURE SETTING:
TO CHANGE FAN SPEEDS:
TO USE AUTO FAN FEATURE:
The fan speed toautomatically set to the speed needed to provideoptimum comfort settings with the set temperature.
If the room needs more cooling, the fan speed will automatically increase. If the room needs lesscooling, the fan speed
will automatically decrease. Auto fan speed cannot be used when in the Fan Only mode.
10
YOU WILL SEE
DO THIS:
YOU WILL SEE:
DO THIS:
YOU WILL SEE THE
SPEED CHOSEN:
LIGHT ON
DO THIS:
YOU WILL SEE:
LIGHT ON
DO THIS:
Air Conditioner Features(continued)
:
Remote control
ON/OFF
MODE
Note : Be sure that there are no obstructions between receiver and remote controller;
Don't drop or throw the remote control; Don't let any liquid in the remote control and
put the remote control directly under the sunlight or any place where is very hot.
Signal transmitter
SLEEP
FAN
ON/OFF button
Press this button, the unit will be turned on,
press it once more, the unit will be turned
off. When turning on or turning off the unit,
the Timer, Sleep function will be canceled,
but the presetting time is still remained.
MODE button
SWING
Press this button, Auto, Cool,Save(Energy
Saver), Fan,Heat mode can be selected
circularly. Auto mode is default while
power on. Under Auto mode,the temperature
will not be displayed; Under Heat mode,
the initial value is 28 82 o F) ;Under other
(
modes, the initial value is 25 77 o F)
( .
AUTO COOL SAVE
HEAT FAN
AUTO
COOL
SAVE
FAN
HEAT (Only for cooling and heating unit.)
SLEEP button
Press this button, Sleep On and Sleep
Off can be selected. After powered on,Sleep
Off is defaulted. After the unit is turned
off, the Sleep function is canceled. After
Sleep function set up, the signal of Sleep
will display. In this mode, the time of timer
can be adjusted. Under Fan and Auto
modes, this function is not available.
FAN button
By pressing this key, you may select AUTO,
FAN 1, FAN 2, FAN 3 or FAN 4, and may
also cycle between them. FAN 4 only in
cool, save and heat mode. After being
energized, AUTO is defaulted.
Fan 1 Fan 2
Fan 3 Fan 4
SWING button
Press this key to activate or deactivate
the swing.
7
7
CL-TTW-10_14