Viessmann VITOTROL 100 Operating Instructions For The System User page 21

Selecting the time program
Disabling time phases
To disable a time phase, set the same
value for the start and stop times.
Copying a time program
You can copy time programs, for exam-
ple to make a new time program from
another where only minor changes are
required.
01. Open the flap.
02. Press twice.
03. Select "Settings" with / .
04. Confirm with OK.
05. Select "Programs" with / .
06. Confirm with OK.
07. With / select the program you
want to change (e.g. "Prog 1").
08. Confirm with OK.
09. With / select "Domestic hot
water".
10. Confirm with OK.
11. Select "Copy from" with / .
12. Confirm with OK.
13. Select the program you want to copy
with / .
14. Confirm with OK.
(cont.)
15. Select "Set" with / to make the
changes.
DHW heating
21