Switching from mode to mode
Simultaneously depress
A
the buttons on both
hinge locks (A).
Pull the nearest section of
the ladder towards you
until it locks into the next
position (B).
Repeat the process to
B
change to the next mode
or to close the ladder for
storage.
Adjusting height
Pull out both locking tabs
on one side of the ladder
Slide the outer ladder
section down the inner
section to the required
rung position and ensure
both locking tabs are
engaged in the rung
Follow the same procedure from the other side of the
ladder
EQUIPMENT SPECIFICATION
Closed dimensions:
Length:
Width:
Depth:
Number of sections:
Rungs per section:
Duty rating:
Maximum static load:
Weight:
EQUIPMENT CARE
Never push the equipment beyond its design limits. If it
will not do what you want with reasonable ease and speed,
assume you have the wrong tool for the job. Contact your
local HSS Hire for advice.
Keep the equipment clean, you will find this less of a
chore if you clean it regularly, rather than wait until the end
of the hire period.
When not in use, store the equipment somewhere clean,
dry and safe from thieves and unauthorised users.
FINISHING OFF
Exit the ladder and close it.
Collect all parts together and give them a final clean up
ready for return, to your local HSS Hire.
1.4m
0.61m
0.2m
4
4
... have you been trained
110kg
The law requires that personnel using this type of equipment
150kg
must be competent and qualified to do so. Training is available at
17.5kg
...any comments?
If you have any suggestions to enable us to improve the
information within this guide please e-mail your comments or
write to the Safety Guide Manager at the address below
©HSS Hire Service Group Ltd 2010 No. 308/01
Group Office: 25 Willow Lane, Mitcham, Surrey CR4 4TS
Web Site: http://www.hss.com
HSS Training Solutions
0845 766 7799
e-mail: safety@hss.com
Operating & Safety Guide 308
Operating & Safety Guide 308
MultiMode
MultiMode
Ladder
Ladder
Aluminium tread ladder provides
different working heights across
4 different modes of operation.
Code 86312
308/01
308/01
Need help?
Do you have a question about the 86312 and is the answer not in the manual?
Questions and answers