Advertisement
LOADING THE SOFTWARE
The software is supplied on both cassette tape and disk.
To load from cassette :-
1. Insert the cassette into the recorder.
2. Press SHIFT/RUN STOP key.
3. Press PLAY on the recorder.
The program will now Load and Auto run. Loading time is
approximately 2.5 minutes.
To load from disk :-
1. Insert the disk into the drive.
2. Type LOAD "PENMASTER",8 and RETURN.
3. Type RUN when the software is loaded.
WHEN THE PROGRAM IS LOADED
1. Plug the Lightpen into the No. 1 Port which is on
the right hand side of your micro.
2. Carry out the calibrating procedure as shown on the
screen.
3. The MAIN MENU will now appear on the screen.
Advertisement
