Advertisement
will now appear on the screen using Dynamic
Banding.
7. You may now Pin Point the cursor.
8. Press the Front Button to lock the 2nd cursor. The
first line in the banding operation will be drawn on the
screen.
9. Move the cursor to the third position and follow
instructions 5 to 8 above.
You may carry out the above operation as often as
required.
10. Press the Back Button to return to the MAIN
MENU.
RAYS
1. Select the RAYS option.
2. Use the pen to move the cursor to the required
centre position of the RAY.
3. Press the Front Button to set the centre cursor.
4. You may now Pin Point the centre cursor. Press the
Front Button to lock the centre cursor.
5. Move 2nd cursor to the required position.
6. Press the Front Button to set the 2nd cursor.
7. You may now Pin Point the cursor. Press the Front
Button to lock the cursor and to draw the first line in the
RAY.
Advertisement
