Panasonic nanoe EH‑NA32 Operating Instructions Manual page 11

Maintaining the air outlet
Clean the air outlet once a month.
Scrub to remove any dust, hair, etc. blocking the mesh.
● The hair dryer should be plugged into the household outlet
only in case of maintenance for the air outlet.
● Set the temperature selector to "
to " " for using cool airflow to blow away the dust, etc., as
you scrub with the toothbrush.
►Notes
• During maintenance, do not block the air inlet with your
hands, etc.
• During or after maintenance of the air outlet, dust, etc. may
scatter. Ensure that the hair dryer blows no dust, etc. from
the air outlet before using. (Do not look into the air outlet.)
(Use a commercially available toothbrush.)
" and the power switch
Maintaining the nanoe™ outlet
Clean the nanoe™ outlet at least once a month.
In order to maintain the generation amount of nanoe™.
1. Prepare a commercially available new
cotton swab.
2. Gently insert the swab in the nanoe™
outlet until it stops (about 10 mm), and
then turn the cotton swab 2‑3 times
carefully.
►Note
• It is easier to clean the nanoe™ outlet with a narrow cotton swab
(for example, one intended for babies).
nanoe™ outlet
11