Page 1
AC the adapter of the product are correct for the Turntable Hi-Fi System country you live in. Model: HP-H002 Package contents Make sure that you have all the included items listed below before using this product.
Precautions Before Use Precautions Before Use Keep these instructions in mind Keep these instructions in mind 1. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near 14. * Devices with class 1 construction should be connected to a mains socket outlet swimming pools.
Precautions Before Use Product Description Keep these instructions in mind Part names and functions 29. Never place this apparatus on other electrical equipment. 30. Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust or vibration.
Product Description Installation Technical Specifications - Unpack all parts and remove protective material. - Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made. Nominal Speeds 33 1/3 & 45RPM - Those instructions are related only to products using power cable or AC power Speed Variance ±1%...
Page 5
Installation Installation 3-Cartridge tracking force adjustment 3-Cartridge tracking force adjustment The counterweight supplied is suitable for cartridges weighing between 3.0-6.0g Rotate the counterweight counter clockwise (seen from the front) to adjust the down force according to the cartridge manufacturer’s recommendations.One mark on the scale represents 0.05g of down force.
Installation Installation 5-Connection to the Amplifier 7-Main Power Connection The power adaptor is in the foam packing material. Unpack the power adaptor and This turntable uses a moving magnetic cartridge. Set the PHONO & Line Out Switch plug the small end into the DC power jack located at the back side of the turntable. on PHONO mode.
Maintenance and Cleaning Cartridge Replacement Your turntable requires little of no regular maintenance. Remove dust with a slightly 6. Adjust the cartridge’s position to make sure it is precisely aligned on the headshell so damp antistatic cloth. Never use a dry cloth, this will create static electricity and that the stylus will be tracking the grooves in parallel perfectly.
Need help?
Do you have a question about the HP-H002 and is the answer not in the manual?
Questions and answers