Table of Contents
Advertisement
F
Figure 15
TEMPERATURE KNOB
To turn on the heating elements of the oven, set first the function selector to the required
setting and then the thermostat knob to the desired temperature.
To set the temperature, line up the temperature knob indicator with the required
temperature.
The elements will turn ON or OFF automatically according to the energy need which is
determined by the thermostat.
The operation of the heating elements is signalled by a light placed on the control panel.
FUNCTION SELECTOR KNOB
Rotate the knob clockwise to set the oven for one of the following functions:
OVEN LIGHT
By setting the knob to this position, only the oven light comes on.
The light remains on whilst any of the cooking modes are selected.
TRADITIONAL CONVECTION COOKING
The upper and lower heating elements are switched on. The heat is diffused by natural
convection and the temperature must be regulated between 40°C and 250°C with the
thermostat knob.
It is necessary to preheat the oven before introducing the foods to be cooked.
20
(fig. 16)
(fig. 15)
0
300
250
200
°C
40
100
150
Figure 16
Advertisement
Table of Contents
