Enterasys ANG-3000 Release Notes page 10

Release Notes
RiverMaster™ Version 3.5
EAP Authentication for PPTP Controlled in L2TP Window
The EAP authentication protocol is supported by PPTP and L2TP but is
controlled from the L2TP configuration tab on RiverMaster. The use of EAP in
PPTP is controlled by the EAP radio button under L2TP. Bug # 3675.
RiverMaster Not Supported on Windows 2000 Platforms
Due to an OCX controls issue, RiverMaster Version 3.1 is not supported on
computers running the Windows 2000 operating system.
Page 10 of 18
To issue the ipsecDefault command, perform the following:
1 Log into the ANG-3000/7000 with the login and password netadmin
(default) and press
2 Load the floppy disk in the ANG-3000/7000's floppy disk drive.
3 Reboot the ANG-3000/7000.
The ANG copies the configuration file to its hard drive.
4 At the command prompt, change directory to usr/indus/ipsec.
5 Type ipsecDefault and press
6 Reboot the ANG-3000/7000.
Upon completing the reboot, the ANG will resume normal tunnel
operation.
For more information, refer to the Application Note: ANG Configuration
Using the Command Line Interface. Bug # 3671:
.
ENTER
ENTER
Known Issues with this Release
.
AVN-RMRN-R312