Operating Via The Matrix; Local Push-Button Operation With Plug-In Display - Endress+Hauser Prosonic T FMU 130 Operating Manual

Prosonic T - FMU 130, 131, 230, 231, 232
18

Operating via the Matrix

The Prosonic T is calibrated and operated using the 10 x 10 Endress+Hauser user
matrix.
The basic configuration can be realized in its simplest form over three matrix fields.
Configuration and operation are always identical for:
• Local push-button operation with display
• Operation via handheld terminal
• Operation via the Silometer FMX 770 (BA 136F) or FXN 671 (TI 236F)
• Operation via a process bus
Display Elements
VH position
Parameter
Bar display:
– Display: current or echo quality
– flashes on alarm
Push Buttons
Push-button
Selecting the Matrix Field
and
Entering Parameters
or
and
Confirming the Entry
or
Locking/Unlocking the Matrix
and
and
Function
Selecting the vertical matrix position.
Selecting the horizontal matrix position.
The display jumps to V0H0.
Activates the appropriate matrix position. The selected
position flashes.
Changes the value of the flashing position by +1.
Changes the value of the flashing position by –1.
Resets the value entered to the original value if it is not yet
confirmed with V or H.
Confirms the entry by leaving the matrix field.
Locking matrix, 9999 is shown in V9H9.
Unlocking matrix, 333 is shown in V9H9.
Endress+Hauser