Step-By-Step Installation - Samsung SRF7500SB User Manual

Table of Contents

Advertisement

Step-by-step installation

STEP 1 Select a site
The site must:
• Have a solid level surface without carpeting or flooring that may obstruct ventilation
• Be out of direct sunlight
• Have adequate room for opening and closing the door
• Be away from any heat source
• Provide room for maintenance and servicing
• Have a temperature range between 10 °C and 43 °C
CAUTION
• If your refrigerator is equipped with an ice maker, provide extra space at the rear of
the refrigerator for the water line connection.
• When you install the refrigerator next to a fixed wall, you must provide a minimum
clearance of 95 mm from the wall to allow the door to swing open.
NOTE
To facilitate moving your refrigerator to its final location, be sure to measure the width
and height of doorways, thresholds, ceilings, stairways, and anything else that needs to be
taken into consideration to ensure you can move your refrigerator safely. The following
diagram illustrates the exact height and depth (factory specifications) of your refrigerator.
Clearance
See the pictures and table below and on the next page for installation space requirements.
B
A
E
C
Untitled-2 27
Depth "A"
Width "B"
Height "C"
Overall
Height "D"
D
Depth "E"
724 mm
908 mm
1749 mm
1777 mm
788 mm
English 27
2019-08-13
1:28:53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents