Fig. 34: Dismantling The Wall Insert - ABB A135-H65 Operation Manual

Operation Manual / 4 Product description / A130-H.. - A140-H
8 Dismantling and fitting / 8.6 Removing the compressor casing
Dismantling the wall insert
Fig. 34: Dismantling the wall insert
1. Knock the wall insert (77000) out of the compressor casing (72000) with a plastic tip
hammer.
2. Attach swivel lifting eye (S) to the compressor casing (72000) and the lifting gear.
3. Lift up the compressor casing (72000).
4. Remove and dispose of the O-ring (77005).
See also
2 View of turbocharger with part numbers [} 90]
2 Spare parts [} 89]
© Copyright 2020 ABB. All rights reserved. HZTL4030_EN Rev.F February 2020