Hitachi HTA-DD1E Service Manual page 7

8. Removal of Front Panel
(a)Invert the Bottom Chassis and remove 4 screws ".
(b)Remove the Master Vol. & Bass/Treble Knob before remove the Front panel.
9. Removal of Inner Panel, Power Switch, Phone
Jack and FL PWB
(a)Release the inner panel from the Bottom Chassis by remove 1 screw # (Fig. 5) and 2 screws $.
(b)Remove 11 screws % and 3 nuts to release the FL board.
(c)Remove 2 screws & to release the Power Switch.
(d)Remove 2 screws ( to release the Phone Jack.
Inner Panel
All manuals and user guides at all-guides.com
Bottom Chassis
Master Vol.
Nut x 2
Nut x 1
13
x 1
5
x 2
12 x 1
11 x 4
Bass/Treble Knob
Fig. 5
15 x 2
13 x 1
14 x 11
Fig. 6
Front Panel
16 x 2