Advertisement
POD1605
2
Download and Install i-gotU Sports
https://market.android.com/details?id=com.mobileaction.isports
For Android phone users, please download i-gotU Sports from Google Play.
Getting Started : To get started with i-gotU Sports, please complete the following settings:
Step 1. Set up personal profile
1.
Open i-gotU Sports app on your phone, and tap on
the upper left corner.
2.
Select [Settings], and fill in your personal information under
[Profile]
section, including Name, Gender, Height, Weight and Age.
Step 2. Scan for device and complete device calibration
1.
Open i-gotU Sports app on your phone, and tap on
the upper left corner.
2.
Select [Sensor], and the app will start device search. Once your
the name of BLE Footpod
device is found, tap on
section of Detected sensor(s) to get connected, and tap on
[Calibration]
afterwards to proceed with device calibration. (To
start with calibration, you'll be guided via a wizard. Follow what's
stated on the screen to complete the procedures.)
Battery Change
+
Supported Devices:
Please visit our manufacturers website for a complete list of
Supported Apps and Compatible devices
http://www.jarvmobile.com/support.asp
Foot Pod Sensor
QR code for
Android phones
http://appstore.com/mobileactiontechnologyinc/igotusports
For iOS phone users, please download i-gotU Sports from App Store.
3.
Properly install your device by either placing it in the shoe or on the
Home
at
shoe as illustrated on the screen. Please stand still while placing the
device, then tap on
4.
Stand on your tiptoe as illustrated. Tap on
5.
Calibration is now complete, and i-gotU Sports has detected the position
of your device as illustrated on the screen.
Home
at
6.
You may now start using i-gotU Sports with the device installed.
shown in the
Important Notice:
In order to ensure the accuracy of detection, the device must be calibrated every
time it is installed.
Use a screw driver to loosen the screws on the battery cover.
Please have the screws kept somewhere.
Remove the battery cover.
Insert an CR2032 coin battery.
Close it with the battery cover.
1.
Please insert the battery with the positive electrode
facing down.
2.
Please make sure the screws on the battery cover are
securely fastened, in case of any water penetration.
Notes:
1.
Although the device is useable in the rain, it is prohibited to be
used under water.
Please do not use any corrosive chemical to clean the device.
2.
3.
Bluetooth is disabled by default. Bluetooth will be activated
automatically upon detection of any sensor movement.
User Manual
QR code for iOS
phones
[Next]
to continue.
[Next]
Important Notice
to continue.
Advertisement
