Table of Contents
Advertisement
Positioning and connecting
en
Open the detergent drawer.
7.
Pour approx. 1 litre of water into
8.
compartment II.
Pour standard detergent into
9.
compartment II.
To prevent foaming, only use
Note:
half of the amount of detergent
recommended by the detergent
manufacturer. Do not use detergent
for wool or delicates.
Close the detergent drawer.
10.
Press Start.
11.
Switch off the appliance at the end of
12.
the programme.
Your washing machine is now ready to
use.
Transportation
e.g. when moving home
Preparatory work:
Turn off the water tap.
1.
Reduce the water pressure in the
2.
supply hose.
Maintenance – filter in the water
supply ~ Page 24
Drain the remaining detergent
3.
solution.
Maintenance – detergent solution
pump blocked ~ Page 23
Disconnect the washing machine
4.
from the mains.
Remove the hoses.
5.
Installing the transport locks:
Remove the covers and keep them
1.
in a safe place.
Use a screwdriver if necessary.
Insert all four sleeves.
2.
36
Clip the mains cable securely in the
holders. Insert and tighten the
screws.
Before initial use:
Notes
The transport locks must be
■
removed.
To prevent unused detergent from
■
flowing straight into the drain during
the next wash: Pour approximately 1
litre of water into compartment II and
select and start the [ Empty
programme.
Advertisement
Table of Contents
