Table of Contents
Advertisement
Seat Instructions
FIG. 11: Securely fasten the seat belt before operating
the machine. Always remain seated and have the seat
belt fastened while operating the machine. Replace the
seat belts when they become worn or broken.
Never wear a seat belt loosely or with slack in the belt
system. Never wear the seat belt in a twisted condition or
pinched between the seat structural members.
When using the instructional seat, if equipped, securely
fasten the seat belt. The instructional seat is to be used
only to train new operators or diagnose a problem. The
instructional seat is only intended for short periods of use.
Extra riders, especially children, are not permitted on the
machine.
When the instructional seat is used the machine must be
driven at a slower speed and on level ground. Avoid quick
starts, stops, and sharp turns. Avoid driving on highways
or public roads.
Shield and Guards
FIG. 12: All shields and guards must be in the correct
operating position and in good condition.
FIG. 13: Do not operate the machine with the drive shaft
shields open or removed. Entanglement in rotating drive
shafts can cause serious injury or death. Stay clear of
rotating components.
Make sure rotating guards turn freely.
700735875 F Rev.
FIG. 11
FIG. 12
FIG. 13
SAFETY
WC1953A
71389544C
WC1941
A-9
Advertisement
Table of Contents
