Operation; Cleaning And Maintenance - MASTOSO MT-67 Manual

English

Operation

1. Once all parts are securely in place, connect the power cord to an approved power
source.
2. Place the pulp container under the pulp ejection and a glass under the spout for
juice.
3. The Slow Juicer has three settings:
ON – This starts the motor for juicing.
OFF – This stops the operation.
REV – This moves the auger in the opposite
direction.
4. Before placing food in the juicer, please make sure all foods are thoroughly
washed and cleaned, cut all foods to an appropriate size to easily fit into the food
chute. Please remove any hard seeds before juicing.
5. For the most part, when placing food into the Slow Juicer, the auger will pull in the
food and start juicing immediately. You will need the included pusher with some foods.
6. The Slow Juicer has a unique simple cleaning process when switching between
different flavors of juices and fruits. When you are ready, simply pour water through
the food chute. This will rinse out most of the residue and you are ready to keep
juicing.
NOTE: This is not an alternative to a complete cleaning of each disassembled part.

Cleaning and Maintenance

1. Switch off the machine and disconnect
from power source.
2. Turn the food chute in an anti-clockwise
direction to unlock.
3. Twist the bowl anti-clockwise to the
unlock position and lift out the entire
section.
16
user manual.indd 16 8/21/14 4:28 PM