Advertisement
Operation
Hush
®
Control Feature
Model 0946CA only:
Smoke alarms are designed to minimize nuisance alarms.
Cigarette smoke will not normally set off the alarm, unless
the smoke is blown directly into the alarm. Combustion
particles from cooking may set off the alarm if the alarm
is located close to the cooking area. Large quantities of
combustible particles are generated from spills or when
broiling. Using the fan on a range hood that vents to the
outside (non-recirculating type) will also help remove
these combustible particles from the kitchen. The Hush
button is extremely useful in a kitchen area or other areas
prone to nuisance alarms.
The Hush
desensitizing the alarm circuit for about 8 minutes. This
feature is to be used only when a known alarm condition,
such as smoke from cooking, activates the alarm.
If the alarm does sound, check for fires first. If a fire is
discovered, get out and call the fire department. If no fire
is present, check to see if one of the reasons listed in
Locations to Avoid may have caused the alarm.
The smoke alarm is desensitized by pushing the Hush
button on the smoke alarm cover. If the smoke is not too
dense, the alarm will silence immediately.
The red LED will Illuminate for 1.5 seconds every 8
seconds to indicate that the alarm is in a temporarily
desensitized condition.
The smoke alarm will automatically reset after
approximately 8 minutes. If after this period particles of
combustion are still present, the alarm will sound again.
The Hush
has been cleared of the condition causing the alarm.
Pushing the Test button on the alarm will end the Hush
period.
1 1
®
feature has the capability of temporarily
®
feature can be used repeatedly until the air
®
®
®
Advertisement
