Home Zone Security ES06529V Installation Instructions

s e c u r i t y

IMPORTANT SAFETY OPERATING INSTRUCTIONS

1.
Please read all warning and instruction before attempting to install this light.
2.
Disconnect power before installing or servicing.

RISK OF ELECTRICAL SHOCK

1. Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
2. Make sure all electrical and grounded connections are in accordance with the National Electrical Code and
applicable local code requirements.
3. All wiring connections should be in compliance with UL standard.

RISK OF INJURY

1. Wear gloves and safety glasses at all times when moving luminaire from carton, installing, servicing or
performing maintenance.
2. Avoid direct eye exposure to the light source while it is on. Or this may cause irreparable damage to the
eyes.
3. Account for small parts and destroy packing material, as these may be hazardous to children.

RISK OF BURN

1. Allow fixture to cool before touch.
2. Do not exceed maximum wattage marked on luminaire label.
Attention: lights must to be installed by the experienced household wire installer or a qualified electrician,
Electrical system and the electrical connection method of light fixture must conform to the national electrical
standards and specification requirements of the local architecture.
REF. PARTS
A
Light fixture
A
Mounting bar
B
C
EVA gasket
C

PARAMETER:

1.
Illumination output: approx. 2000 lumens / 5000K
2.
Wattage: 20 W
3.
Power source: AC120V/60Hz
www.homezonesecurity.com
Twin-Head Dusk to Dawn Security Light
B C D
1PC D Rubber cover
1PC E Rubber ring
1PC F Wire nut
E F G
1PC G Tie bolt
1PC H Mounting screw
I Ground screw
3PCS
Model No. ES06529V
H I
1PC
2groups
(4PCS)
1PC
(888) 782-5618