Home Zone Security ES00756V Installation Instructions

s e c u r i t y
IMPORTANT SAFETY OPERATING INSTRUCTIONS
1.
Please read all warning and instruction labels which are included in the box and fixture to avoid personal injury, property damage
caused by fire, cuts, bruises, death and other dangers.
2.
Please follow these general precautions before installing, maintaining, or fixing
RISK OF ELECTRICAL SHOCK
1. Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
2. Make sure all electrical and grounded connections are in accordance with the National Electrical Code and
applicable local code requirements.
3. All wiring connections should be in compliance with UL standard.
RISK OF INJURY
1. Wear gloves and safety glasses at all times when moving luminaire from carton, installing, servicing or
performing maintenance.
2. Avoid direct eye exposure to the light source while it is on. Or this may cause irreparable damage to the
eyes.
3. Account for small parts and destroy packing material, as these may be hazardous to children.
RISK OF BURN
1. Allow fixture to cool before before touch.
2. Do not exceed maximum wattage marked on luminaire label.
Attention: lights must to be installed by the experienced household wire installer or a qualified electrician,
Electrical system and the electrical connection method of light fixture must conform to the national electrical
standards and specification requirements of the local architecture.
REF. PARTS
A
Light fixture
A
Mounting bracket
B
Wire nut
C
PARAMETER:
1.
Illumination output: approx. 1300 lumens / 3000K
2.
Wattage: 13W
3.
Power source: AC120V/60Hz
4.
Dusk to dawn
www.homezonesecurity.com
B C
1PC D Mounting screw #1
1PC E Mounting screw #2
2PCS F GND screw
LED Wall Pack Light
D E F
2PCS G Centre screw
2PCS H Rubber cap
1PC
Model No. ES00756V
G H
1PC
1PC
(888) 782-5618