Assembling The Speaker Stand To The Speaker; Speaker System Connection - LG HT902TR Owner's Manual

Assembling the speaker stand
to the speaker
Before connecting the speakers, assemble the
speaker stand to the speaker as illustrated.
Speaker stand
Speaker cover
Hole
Tip:
You can use the speaker
without the speaker stand by
installing it on the wall.

Speaker System Connection

Connect the speakers using the supplied speaker
cables.
To obtain the best possible surround sound, adjust the
speaker parameters (volume, distance, etc.).
1. Stick the speaker
stand to the
speaker.
speaker
(Right
surround)
2. Detach the speaker
cover on the rear of
the speaker, and
then connect the
speaker stand and
the speaker by
screws.
3. Pull the speaker
cable through the
hole on the speaker
stand, and then
draw the speaker
cable through the
hole on the bottom
Notes:
of the speaker
stand.
4. Connect the
speaker cable to the
appropriate
terminals on the
rear of speaker, and
then attach the
speaker cover.
Hole to hang
the speaker
on the wall
Front speaker
(Right)
Rear
Center speaker
Subwoofer
Be sure to match the speaker cable to the
appropriate terminal on the components: + to + and
– to –. If the cables are reversed, the sound will be
distorted and will lack base.
If you use front speakers with low maximum input
rating, adjust the volume carefully to avoid
excessive output on the speakers.
Front speaker
(Left)
Rear
speaker
(Left
surround)
9