Charging - Samsung GALAXY Tab S Basic Manual

◎ If the card does not click into place, use a rounded object (1
yen coin, etc.) to slowly insert the card until it clicks into place.
◎ If hard sharp objects or easily breakable objects (a driver, a
toothpick, etc.) are forcibly inserted in, foreign matter may get
in or the frame might get scratched.
■ Removing a microSD memory card
Open microSD memory card slot cover
a
• To remove microSD memory card with the product turned
on, on the home screen, tap [基本機能 (Basic function)] →
[Settings] → [General] → [Storage] → [Unmount SD card]
→ [OK] and confirm that
before removing it.
Push microSD memory card all the way until
b
it clicks, and take out the slightly protruding
microSD memory card
Press microSD memory card slot cover firmly
c
and make sure that there is no gap in between
◎ Do not use force to remove the microSD memory card. Doing
so may cause a fault or data loss.
◎ After using this product for a long time, the removed microSD
memory card may be warm; this is normal.
is displayed on the status bar

Charging

When you purchase your product, the internal battery is not
fully charged. Be sure to charge the internal battery before
use.
• "Charging: XX%" appears under the date and time on the lock
screen when charging. (uP.30)
microUSB cable 01
(sold separately)
To AC 100 V outlet
Common AC
adapter 05
(sold separately)
* You cannot charge using both the specified AC adapter (sold separately) and a
PC at the same time.
Failure to do so may cause significant damage to the
product. Damage from incorrect connection is out of
compensation.
◎ Quick charging can be used when the power is off or backlight
of screen turns off.
◎ When battery level is 50% or more, charging speed by quick
charging may be slow.
◎ Charging with a PC or using the camera function or other
functions while charging may increase charge time.
microUSB plug
27