Samsung GALAXY Tab S Basic Manual page 23

■ 2.4 GHz frequency band precautions
The frequencies used by the Bluetooth
LAN (Wi-Fi ® ) function of this product are in the 2.4 GHz
band. In this frequency band, other similar wireless stations,
in-plant wireless stations for mobile unit identification that
require a license to use, such as factory production lines,
specific small power wireless stations that do not require
licenses, amateur wireless stations (collectively called
"other wireless stations" from here on) are operated in
addition to home electrical appliances such as microwave
ovens, devices for industrial, scientific and medical devices.
1. Before using this product, make sure that "other wireless stations" are not
in operation nearby.
2. In the event that instances of radio wave interference have occurred
between this product and "other wireless stations", immediately either
relocate this product or stop operation of the device (stop the emission of
radio waves).
3. If you are unclear on any points or are troubled by anything, contact an au
shop or Customer Service Center.
® and/or wireless
◎ The connections between this product and all other Bluetooth
◎ This product supports security features for wireless
◎ Wireless LAN (Wi-Fi
◎ The Company assumes no responsibility for leakage of data or
◎ Since Bluetooth
Bluetooth
product use frequencies in the 2.4 GHz band.
and wireless LAN (Wi-Fi ® ) devices have not been confirmed.
Therefore, connections with all Bluetooth
(Wi-Fi ® ) devices are not guaranteed.
communications that are compliant with the Bluetooth
wireless LAN (Wi-Fi ) standard specifications, but the security
®
may not be sufficient depending on the usage environment and
configuration. Be careful when making data communication
using Bluetooth ® or wireless LAN (Wi-Fi
® ) has the advantage that it can be freely
connected anywhere within the radio wave range, as it uses
radio waves for exchanging information. At the same time, there
is a risk that a malicious third party may obtain unauthorized
access if security settings have not been configured. You
are recommended to configure security settings before using
wireless LAN (Wi-Fi ® ) at your decision and responsibility.
information that may occur during Bluetooth
Fi ® ) communication.
® and wireless LAN (Wi-Fi
same frequency band, using the both functions at the same
may cause radio wave interference resulting in decreased
communication speed or disconnection from the network.
If connection fails, stop using either of the Bluetooth
wireless LAN (Wi-Fi ® ) functions.
® and wireless LAN (Wi-Fi
/ XX8
®
® and wireless LAN
® and
® ) function.
/wireless LAN (Wi-
®
® ) functions use the
and
®
® ) functions of this
21