Installation - prime3 EES21 Owner's Manual

EES21
15. Motor
Unpacking
After opening the cardboard box, first remove the scooter and make sure that all parts are complete. If
anything is missing, contact your dealer. Check the condition of the unit and its appearance to ensure
that the folding system is stable enough and that the platform is free from cracks. Check also that the
display screen is not damaged.

Installation

After unpacking and checking the condition of all components, you can start assembling the scooter.
Follow the picture below:
1. Press the folding mechanism button down, release the lock and unfold the electric scooter.
2. You hear the characteristic click if the scooter has been fully unfolded.
An anti-slip sticker is included in the set, its installation is not obligatory. Before sticking, make sure that the
platform surface is completely dry and degreased.
Guide to safe driving
The content of this chapter is very important, read it carefully and follow all safety rules and procedures. Our
company is not responsible for any accidents that result in property or health damage due to the violation of
this safe driving guide.
An electric scooter is not only a fun tool but also a means of transport. Following proper safety precautions
while driving can protect you and others from an accident. Please note that using your scooter in the field and
on public roads can lead to collisions caused by other road users, even if you follow all safety precautions. It is
very important to keep a sufficient distance from other road users and from other vehicles.
Do not charge the battery when handling, cleaning, or maintaining the scooter.
Regularly check the tightness of all bolted connections. After detecting any slack, remove them immediately
by tightening the appropriate screws. The presence of looseness in bolted joints is normal and is not covered
by the warranty.
Driving the scooter
• Observe the local road traffic regulations when driving on a scooter. You should guide the scooter carefully
6