Advertisement
Contents
Connections
Listening to preset stations
1
Use 0 – 9, +10 or CHANNEL –, + to select the preset
number.
Front panel
Display
Playback
Settings
Setting the preset channels and
changing the received frequency on
the main unit
Preset/Tuning buttons (–, +) on the main unit can be used both for
switching the preset channel and for tuning.
Before operating them, switch the main unit to the "PRESET MODE" or
"TUNING MODE" using the procedure below.
1
Press SETUP.
2
Use ui to select "TUNER SETUP", then press ENTER.
3
Use ui to select "MODE SELECT", then press ENTER.
4
Use ui to select "PRESET MODE" or "TUNING MODE",
then press ENTER.
34
Rear panel
Tips
Use Preset/Tuning buttons (–, +) on the
main unit to switch preset channels.
PRESET MODE:
This is the same operation as
0
CHANNEL – or CHANNEL + on the
remote control unit.
Use Preset/Tuning buttons (–, +) on the
main unit to change the received
frequency.
TUNING MODE:
This is the same operation as TUNE
0
– or TUNE + on the remote control
unit.
Remote
Index
Appendix
Advertisement
