Advertisement
WARP Plus
GSM Least Cost Routing (LCR) Quick Start Configuration Guide
Visit the
WARP Plus Support Page
Forum
for additional help.
Requirements
•
Non-VLAN tagged LAN port at the customer premise on same network as
the IP phones
•
Unique SIP User Agent (UA) account for LCR.
•
Feature code or extension for LCR provisioned on the BroadSoft switch
•
Software license for GSM Least Cost Routing
•
GSM Module, cable and antenna. Refer to the WARP Plus Quick Start Guide
for installation instructions.
Starting the WARP Appliance
•
Ensure that you have installed the GSM module according to the instructions
in the WARP Plus Quick Start Guide.
•
Start the WARP appliance at the customer premise.
•
After approximately two minutes, the WARP appliance is ready to use when
the LCD displays WARP PLUS. Underneath, Version release indicates the
software version.
•
The LCD has the following screens:
•
WARP Plus title screen
•
IP address screen
•
Error codes screen.
•
The first time the WARP appliance starts, errors may appear on the
Error codes screen if no features are provisioned. After subsequent
restarts, the screen should show ERROR CODES None. If not,
contact your system administrator for a list of error codes.
•
Use the toggle button beside the LCD to switch between screens.
for related documents and the
WARP Plus
Copyright © 2011 PIKA Technologies – Version 1.1 September 2011
Logging on to the Web GUI
•
Use the toggle button beside the LCD on the WARP appliance to switch to
the IP address screen.
•
On the address bar of your browser, type the IP address of the WARP
appliance. The WARP Plus Login screen appears.
•
In the Login box, type admin. In the Password box, type pikapika.
Activating the GSM Least Cost Routing License
•
You need external WAN access to reach the PIKA license activation server.
Under the System menu, click Licensing.
•
•
In the Least Cost Routing row in the feature list table, type the license key
from the license email you received and click Apply.
•
If license activation succeeds, in the feature list table, the Status column
shows the value Licensed.
Advertisement
Table of Contents
Related Manuals for PIKA WARP Plus
Summary of Contents for PIKA WARP Plus
- Page 1 Under the System menu, click Licensing. • • GSM Module, cable and antenna. Refer to the WARP Plus Quick Start Guide • In the Least Cost Routing row in the feature list table, type the license key for installation instructions.
- Page 2 SIP server or SIP phones. • When you finish dialling, there is a delay before the call connects. Press the ‘#’ key to indicate that you have finished dialling. After you finish, click Save. Copyright © 2011 PIKA Technologies – Version 1.1 September 2011...
Need help?
Do you have a question about the WARP Plus and is the answer not in the manual?
Questions and answers