Champ 1410 Manual page 2

1.
Place the Bottom Base Shelf (A) upside
down on floor and install the 4 Wheels (B)
into the caster holders on the base shelf.
3.
Place first Shelf (D) on the bottom set of
crossbeams on Upright Support (C).
5.
Insert the Upright Support (C) into the
bottom of the first Crossbeam Support (E).
2.
Insert the 2 Upright Supports (C) into each
side of the Bottom Base Shelf (A).
Note: Do not tighten the bolts on Base Shelf (A),
leave loose. Allows for easy installation of shelves
in steps 3 and 4.
4.
Place second Shelf (D) on the top set of
crossbeams on Upright Support (C).
6.
Insert the Upright Support (C) into the
bottom of the second Crossbeam Support
(E).