Related Manuals for Rath 2100-VOIP2CS
Summary of Contents for Rath 2100-VOIP2CS
- Page 1 Installation & Operations Manual IP Interface 2100-VOIP2CS RP8500CATA2 Ver. 2 N56W24720 N. Corporate Circle Sussex, WI 53089 03/21 800-451-1460 www.rathcommunications.com 2 Year Warranty...
- Page 2 Thank you for purchasing RATH’s IP Interface. We are the largest Emergency Communication Manufacturer in North America and have been in business for over 35 years. We take great pride in our products, service, and support. Our Emergency Products are of the highest quality.
- Page 3 Click SUBMIT at the bottom of the page (unit will automatically reboot) Note: If using both ports on 2100-VOIP2CS, repeat above steps in Line 2 section of QUICK SETUP (Line 2 will require a different Name and Authentication ID than Line 1).
- Page 4 192.168.1.160). The 2100-VOIP2CS will have to be connected to a network capable of DHC. Plug Ethernet cable back into the Ethernet port on the 2100-VOIP2CS then to log back into the unit. Perform one of the following steps: 1.
- Page 5 • Verify Ethernet port on computer isn’t set to same IP Address as the 2100-VOIP2CS. • Plug an analog telephone into the Phone 1 port on the 2100-VoIP2CS and perform the following to verify IP information entered into device: 1. Lift the handset on the analog phone and dial *, *, *, * 2.
Need help?
Do you have a question about the 2100-VOIP2CS and is the answer not in the manual?
Questions and answers