Moman C2 User Manual

MOMAN
Microphone C2
User Manual
Thank you for choosing MOMAN product. Please read this manual carefully
before use and follow all instructions mentioned herein.
Caring For Your MOMAN Product
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any
malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
Operations
1 Power/Pairing
OLED
2
Screen
3 Built-in Microphone
4 External Mic Input
5 USB-C Port
6
Pocket Clip
Operations
TX Transmitter
1.Power On
Long press the power button for 2 seconds to turn on/off the system.
A TX Battery Status
2.Pairing
B Signal Strength
They are paired after power on. If pairing is required, press the pairing button
C Input Level (PK=limiter) and the system will start to search. Press the pairing button on TX twice, and
that on RX once, the TX and RX will be paired.
3.Connection
The receiver outputs audio signals to recording devices with a 3.5mm TRRS
Phone Cable or a 3.5mm TRS Camera Cable. Please use the corresponding
cable based on your device.
RX Receiver
1 Power
A TX Battery Status
B RX Battery Status
OLED
2 C Output Level (PK=limiter)
Screen
D Pairing Status & Signal Strength
E Gain
3
Pairing
4 Volume
5 TRS Output
6
USB-C Port
7 Pocket Clip