Av-In Mode; Setting Control; Sound Control - Soundstream VR-535B Owner's Manual

◆AV-IN Mode

To start AV-IN Mode, tap on AV-IN button from
main menu screen.
Connect the external audio/video signal source to this
unit. Select AV-IN mode in the main menu or by pressing
repeat Mode button on the front panel.
Note: If there is no external video input, the TFT displays
"NO SIGNAL".
1. Press the △ / ▽ icon to adjust TFT angle.
2. Press the

◆SETTING CONTROL

Your device has default system settings. You can customize the settings to suit your personal
needs. Once you change settings, your new settings will remain until you change it again. To start
SETTING, tap it on main menu.

SOUND CONTROL

Tap SOUND button to show SOUND1 menu.
Tap button to show SOUND 2 menu.
icon to be back to main menu.
EQUALIZER Select EQ mode
BASS Bass up/down
TREBLE Treble up/down
BALANCE Left/Right Balance Control
FADER Front/Back Fader Control
BEEP
LOUDNESS
SUBWOOFER
16
Keypad sound setting on or
off
Set LOUD ON/OFF
Set SUBWOOFER ON or
OFF