Table of Contents
Advertisement
Restoring to the factory settings
When you want to delete all pairing device information, etc., you can restore the unit to the factory settings
(original settings upon purchase). Charge the battery before restoring the unit.
1
While the unit is turned off, press and hold [Í/I ( )] for at least 5 seconds until the
power/pairing LED starts blinking alternately in blue and red.
2
While the power/pairing LED is blinking alternately in blue and red, slide and hold the
Multiple functions button towards "+" and at the same time press and hold
[Í/I ( )] for at least 5 seconds.
• The default settings will be restored after the power/pairing LED (blue) blinks fast and the unit turns off.
∫ Attention
• When pairing a device again, delete the registering information (Device: "RP-HD610N") from the Bluetooth
menu, and register this unit with the Bluetooth
Copyright, etc.
®
The Bluetooth
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their
respective owners.
Apple, the Apple logo and Siri are trademarks of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc.
Google, Android, Google Play, and other related marks and logos are trademarks of Google LLC.
LDAC and LDAC logo are trademarks of Sony Corporation.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries.
aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other
countries.
Other system names and product names appearing in this document are in general the registered
trademarks or trademarks of the respective developer companies.
TM
Note that the
mark and
Certification information (a) can be found on the right side of the headphones. Remove the right ear pad to see it.
(1)
To attach the ear pad, align the four tabs (b, c), and push the ear pad in until a clicking sound is heard to lock it
into place. (2)
1
®
device again. (
®
mark do not appear in this document.
2
Other
l
10)
23
®
device's
Upside
Advertisement
Table of Contents
