Table of Contents
Advertisement
92
10.8.
Routing
If your WIRELESS ROUTER device is connected a
network with different subnets, then this feature will
allow the different subnets to communicate with each
other.
Static Routing
Enable Static Routing
Tick this box to Enable the Static Router feature.
Destination LAN IP
Enter the IP address of the destination LAN.
Subnet Mask
Enter the Subnet Mask of the destination LAN IP address
Default Gateway
Enter the IP address of the Default Gateway for this destination IP and Subnet.
Hops
Specify the maximum number of Hops in the static routing rule.
Interface
Select whether the routing applies to LAN or WAN interfaces.
- Quick Links:
- Configuring Your Router
Hide quick links:
Advertisement
Table of Contents
