EnGenius EP-490 User Manual page 9

6.
Caller ID
• Displays incoming call phone number and name on
the LCD (needs Caller ID service from local
telephone company)
7.
Call waiting with Caller ID
nd
•
Displays 2 incoming call information on the same
st
phone line when 1 call is in progress (needs Call
Waiting with Caller ID service from local telephone
company)
8.
Call Transfer
a. Direct Transfer: transfer a telephone call to another
handset without announcement.
b. Announced Transfer: speak to the destination
handset before transferring a telephone call.
9.
Call Forwarding
a. Forward all incoming phone calls to another handset.
b.
Forward all incoming phone calls to another landline
or cellular phone number.
Note:
1. Once enabled from the handset, all phone calls will be
routed to the designated number until disabled. A
warning message will appear on the LCD.
2. Intercom calls are not forwarded.
10.
Call Conferencing
a.
2-handset and 1-line conferencing
b.
1-handset and 2-line conferencing
11.
DND (Do Not Disturb, i.e., Silent Ring)
12.
Administrator programmable Flash key timing
a.
From an administrator handset (Handset 10 or 11),
press MENU-9-2-4 to select flash key timing.
17
b.
9-level (100 ms - 900 ms) timing selections, default=
600 ms.
Note: The default value (600 ms) works in most areas.
Changing this setting may cause Flash key not working.
Change only when you are certain of the new value would
work.
13.
Three Call Logs
a.
Called Log: Stores 10 phone numbers (up to 28
digits each) dialed most recently. Can perform last-
number redial on all 10 numbers.
b.
Received Call Log: 10 entries (14-digit phone
number, 14-character names, and time stamp),
needs Caller ID service from local telephone
company.
c.
Missed Call Log: 10 entries (14-digit phone number,
14-character names, and time stamp), needs Caller
ID service from local telephone company.
d.
Phone numbers and names can be saved into
phonebook while in display.
14.
Any Key Answer (except PWR, END, Silent Soft Key)
15.
Keyguard
• Prevents accidental dialing.
16.
Dialing Prefix
• Up to 14 digits, including pause(s), one access code
can be pre-programmed to be added automatically in
front of the dialed number when dialing from call logs,
phonebook, and dial-and-send dialing.
17.
Call Hold
a.
Places call on hold.
b.
Change battery while call is on hold.
18.
Mute
18