Color - Acer P1560Bi User Manual

20

Color

LumiSense The light sensor of LumiSense+ technology can intelligently
optimize the brightness and color saturation of projected image
based on actual ambient light. The feature greatly enhances dark
detail visibility and color saturation.
•
•
•
•
<Note>: Once LumiSense is enabled, BluelightShield switches to
"Off".
<Note>: Once Dynamic Black is enabled, ECO Mode is grayout.
BluelightShield •
•
<Note>: Once BluelightShield is enabled, LumiSense switches to
"Off".
Display Mode There are many factory presets optimized for various types of
images.
•
•
•
•
•
•
•
<Note>: Once EcoPro is enabled, ECO Mode switches to EcoPro at
the same time.
<Note>: After the above setting is done, if user changes to other
Dislay mode settings rather than EcoPro, ECO Mode switches to
"Off".
<Note>: When EcoPro is enabled for 4 hours, the projector will
switch to the power consumption of ECO mode for 10 minutes, and
then switches back to EcoPro mode again. During the period time
of ECO mode, the lamp will become brighter.
Reference Mode For user mode settings.
Brightness
Adjust the brightness of the image.
•
•
Off: For normal mode. (ambient light sensor is off)
Normal: Select "Normal" to meet the visual effect of dark
detail enhancement.
Boost: Select "Boost" to meet the visual effect of brightness
boost.
Dynamic Black:automatically optimize the display of dark
movie scenes enabling them to be shown in incredible detail.
Off: Default setting.
Low / Medium / High: Select Low / Medium / High to reduce
different exposure levels of blue light dynamically.
Bright: For brightness optimization.
Presentation: For meeting presentation.
Standard: For common environment.
Video: For playing video in a bright environment.
EcoPro: Dims the projector lamp to the very low status which
will extend the lamp life to 20,000 hours.
User 1/User 2: Memorize user's settings.
3D: Only available for 3D input signal.
Press to darken the image.
Press to lighten the image.