Next Advance Checkit Go Instructions For Using

Next Advance Checkit Go Instructions For Using

Advertisement

1. Fill it
Draw dye into the
pipette or robot's tips.
IMPORTANT: It is crucial that the dye is
dispensed into the center of each well.
Avoid splatter or dispensing air bubbles.
Instructions for using the Checkit® Go
2. Dispense it
Pipette the dye
into the wells.
3. Flip it
Using light force, flip up the
8-well tab with your finger or
pipette tips to fully vertical.
4. Check it
In a few seconds, use the
graduations to determine
the dispensed volume.
RS18-0101B

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Checkit Go and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Next Advance Checkit Go

  • Page 1 Instructions for using the Checkit® Go 1. Fill it 2. Dispense it 3. Flip it 4. Check it Draw dye into the Pipette the dye Using light force, flip up the In a few seconds, use the into the wells. pipette or robot’s tips.
  • Page 2 Set your multi-channel pipette or robot to the corresponding volume and follow the steps illustrated on the other side of this sheet. For example, on a 20μL Checkit Go, each channel is designed for measuring 20μL.

Table of Contents