Page 2
[Schéma partie 2] Condition d’utilisation - Placer les joints dans les connecteurs femelles du mitigeur avant de serrer les écrous du mitigeur. - Pression minimum : 1 bar / maximum : 5 bars (au-delà, monter - Lors de la première utilisation, assurez-vous du fonctionnement un réducteur de pression).
Page 3
Terms of use Utilisation - Minimum pressure: 1 bar / maximum: 5 bars (beyond, install a pressure reducer). Le mitigeur permet d’utiliser soit la tête de colonne, soit le flexible. - Make sure that the supply pressures for hot and cold water are Pour passer de l’un à...
Page 4
NB : For the fitting to your installation: tighten the fitting or the nuts securely using a wrench. Avoid excessive tightening, which could The mixer allows you to use either the column head or the hose. To break the thread or cause micro cracks which could expand over switch from one to the other, it depends of the position of the spur time and the pressure of the water and cause a leak.
Page 5
Produit d'installation n ° 1 OCEACDVM37ACH OCEACDVM37ABK OCEACDVM37ACH OCEACDVM37ABK OCEACDVM37BCH OCEACDVM37BCH OCEACDVM37BBK OCEACDVM37C OCEACDVM37BBK...
Page 6
① Froid G1/2 Chaud OCEACDVM37C ② ③ 1hour...
Page 8
FIXATIONS MURALES / WALL MOUNTING LES MURS PLEINS / SOLID WALL IMPORTANT: pour la fixation murale, utiliser des vis et des CHEVILLE NYLON “FISCHERE” CHEVILLE D’ANCRAGEMETAL chevilles adaptées à la nature du mur. En cas de doute, contacter NYLON WALL PLUG METALLIC ANCHOR votre magasin de bricolage.
Need help?
Do you have a question about the OCEACDVM37C and is the answer not in the manual?
Questions and answers