Download Print this page

Samsung MWR-VH01 User Manual page 2

Wired remote control

Advertisement

Safety Precautions
• Before using the wired remote control, read this instructions carefully.
• After reading the instructions, keep this user's manual and installation manual
in a handy and safe place for further reference.
• Never attempt to install or move the wired remote control by yourself.
WARNING
CAUTION
2
E-
D o not install the unit by yourself. Incorrect installation

of the unit could cause injury due to fire, electric shock or
water leakage. Consult a dealer or a qualified installer.
I nstall the cables with supplied cables firmly.

If the connection or fixing is incomplete, heat generation,
electric shock or fire may occur.
T he first installation or reinstallation as well must be

carried out by a licensed installer or qualified personnel.
I nstall the unit in a place where it is strong enough

to hold the product weight. If the unit is not installed
securely, the unit may fall and it may cause injury.
I f strange noises, burning smell or smoke come from the

product, disconnect the power supply immediately and
consult an authorized service personnel.
D o not attempt to repair, move, modify or reinstall the

unit on your own. Make sure that these installations are
carried out by qualified personnel to avoid electric shock
or fire.
D o not install the product in a place where it is exposed

to inflammable gas leakage.
Do not handle the wired remote control with wet hands.

There is a risk of electric shock.
Do not spray inflammable gas or insecticides on the

product. It may cause fire or malfunction.
Do not spill any kind of liquid into the product. If this

happen, unplug or turn the main switch of the product
off and contact an authorized service center.
Do not use the product with other purpose. It is produced

for ventilators only.
Do not use substances such as benzene, thinner or

alcohol to clean the surface of the product.
Do not install the product in the place where exposed to

sulfurous acid or steam because it may damage the parts
or cause malfunction.
Do not pull or bend the electric wires excessively.

Electric shock or loss of property may occur.
Do not press buttons with a pointed thing.

Do not give a excessive shock to the product or

disassemble it by yourself.

Advertisement

loading