Important Safety Rules - Sable SA-HF025 User Manual

EN

IMPORTANT SAFETY RULES

Read and follow all safety information and instructions. Keep for future reference. Before
using, inflate the product, and then leaving it for 10 minutes to check whether the product
leaks. Do not use a damaged or leaking product.
Before Inflating the Pool
1. Find an absolutely flat and level surface to set up the pool. Locate it close to a water
source or drainage.
2. The product is inflatable. To be used outdoors, clear all the branches, stones, or other
sharp objects that may puncture the pool liner or cause injury. Do not install on wooden,
felt flooring or other areas prone to water damage or close to electrical appliances or lines.
3. Not a lifesaving product, do not use on water.
4. Inflate the pool chambers up to 80% of its capacity. Do not inflate the product before
dragging it to avoid leaks or damages.
5. Fill water no hotter than 60 °C / 140 °F. Fill cold water f irst before mixing with hot water.
Caution
1. Not for babies who are:
· With a Neonatal Apgar score less than 8 points
· With neonatal diseases requiring treatment
· Premature babies born early than 32 weeks and weighing less than 1800 grams (4 lbs)
· Allergic to PVC or similar materials
· Diagnosed by the doctors not suitable for swimming
2. Children must be under close adult supervision when in or near the pool.
3. Diving or jumping may result in broken neck, paralysis,
permanent injury or death.
01
Warning
· Use hygienic and clean water, do not f ill with river, f ire water, or water not up to health
standards.
· Clean the pool regularly, do not store it in a dark, humid environment to avoid buildup of bacteria .
· Do not move the product once filled with water, it may collapse from pressure.
Set Up the Pool
1. Find a flat, level surface that is free and clear of stones, branches or other sharp objects.
2. Move the product (in its package) to the selected site before inflating.
3. Slowly unfold the product and inspect for rips, tears, or punctures. Do not use if the
product is damaged.
4. Lay the pool out as evenly as possible and close all drain plugs and/or exhaust valve caps
if any.
5. Inflate the bottom air chamber first with an air pump designed specifically for inflatable
products, and then the next chamber or chambers in sequence.
6. Fill the product with air until the surface is f irm to the touch. Do not over-inflate or use
high pressure air compressor since it may result in seam leaks.
7. Close and recess all inflation valve cap(s) securely by pushing down f irmly on it.
8. Slowly f ill with water no higher than the marked max line.
Plug the water outlet on the side
Inflate the chambers of the pool one by one
Plug the water outlet on the bottom
Cap on the valve plug
02