Office Star Products Space Seating 67-E36N69R5 Operating Instructions

ÉTAPE 1 ÉTAPE 2
4
X5
2
1
ÉTAPE 4 ÉTAPE 5
13
9
X3
5
9 X3
X3 8
8 X3
7L
7R
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérifier les
quantités des pièces.
ÉTAPE 1 Insérer cinq Roulettes (2) dans la Base (1), les pousser très fort jusqu'à ce que vous entendiez ou sentiez la Roulette (2) s'enclencher.
ÉTAPE 2 Introduisez le Cylindre pneumatique (3) à la Base (1) et placez le Mécanisme (4) sur le Cylindre pneumatique (3). Mettez de la
pression vers le bas.
ÉTAPE 3 Fixez le Support du dossier (12) à l'arrière de le Mécanisme (4) avec deux Vis pour le support du dossier (11).
SERREZ TOUTES LES VIS POUR LE SUPPORT DU DOSSIER (10) COMME IL FAUT AVEC LA CLÉ ALLEN (13).
ÉTAPE 4 Fixez les Bras (7L et 7R) au Coussin du siège (5) avec trois Rondelles plates (8) et trois Vis pour les bras (9) pour chaque bras. SERREZ
TOUTES LES VIS POUR LES BRAS (9) COMME IL FAUT AVEC LA CLÉ ALLEN (13).
ÉTAPE 5 Fixez le Coussin du siège (5) au Mécanisme (4) avec la flèche qui se dirige vers l'avant de la chaise en utilisant quatre Vis pour le
mécanisme (10). SERREZ TOUTES LES VIS POUR LE MÉCANISME (10) COMME IL FAUT AVEC LA CLÉ ALLEN (13).
ATTENTION: AVANT D'UTILISER LE FAUTEUIL, S'ASSURER D'AVOIR RESSERRÉ COMPLÈTEMENT TOUTES LES VIS.
67-E36N69R5 / 67-66N69R5
67-37N9G5 / 67-77N9G5
EXECUTIVE MANAGERS CHAIR
INSTRUCTIONS DE MONTAGE
ÉTAPE 3
13
3
11
1
5
PARTE
1. Base . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. Roulettes . . . . . . . . . . . . . . . . . . . . . . . 5
3. Cylindre pneumatique . . . . . . . . . . . . . 1
4. Mécanisme . . . . . . . . . . . . . . . . . . . . . 1
5. Coussin du siège . . . . . . . . . . . . . . . . . 1
6. Dossier . . . . . . . . . . . . . . . . . . . . . . . . . 1
7. Bras (7L et 7R) . . . . . . . . . . . . . . . . . . 2
8. Rondelles plates . . . . . . . . . . . . . . . . . 6
9. Vis pour les bras . . . . . . . . . . . . . . . . . 6
4X 10
10. Vis pour le mécanisme . . . . . . . . . . . . 4
11. Vis pour le support du dossier . . . . . . 2
13
12. Support du dossier (préinstallé) . . . . . 1
13. Clé allen . . . . . . . . . . . . . . . . . . . . . . . 1
© Office Star Products Décembre 2012
6
12
2
1
QTÉ
LIMITED WARRANTY
SPACE ® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by
persons weighing 250 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration,
accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not
cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user
assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five year warranty on
all parts applies. Fabric is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
To make a warranty claim, contact Parts Department via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. Provide model number and description of the
problem and obtain confirmation number. At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component.
It is the customer's responsibility to prepay freight on any components returned to the factory. Return freight on components
covered by warranty will be paid by Office Star Products.
67-E36N69R5 / 67-66N69R5
67-37N9G5 / 67-77N9G5
MANAGERS CHAIR
OPERATING INSTRUCTIONS
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1) up. To
lower seat height sit on chair and lift lever (1) up.
NOTE: It is normal for chair to slightly lower
under body weight.
• MULTI FUNCTION CONTROL
To adjust seat tilt, lift lever (2). Leave lever up for free float or push
lever down to lock at any angle. To adjust Back angle lift lever (3).
Leave lever up for free float or push lever down to lock.
• SEAT SLIDER
To slide the seat, pull lever (4) and release lever (4) when desired
position is reached.
• ARM FLIP UP AND DOWN
To flip arms up, simply pull up on arm. To lower arm, simply pull
down on arm.
4
3
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and
knobs are securely tightened.
3. Check that all bolts screws and knobs are tight every
three months or as needed.
4. Dispose of packing material properly. Do not use
67-E36N69R5
plastic cover as head covering. It may cause
suffocation.
5. Do not use chair as a stepladder.
6. Use this chair for its intended purpose only.
7. Use mild detergent only for cleaning.